This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/565331300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
One position is located on the Kisatchie National Forest in Pineville, LA. One position is located on Ozark-St. Francis National Forest in Russellville, AR.
This position serves as a civil engineer on a Forest Service unit with responsibility for the facilities management program on one or more administrative units.
For additional information about the duties of the positions, please see the additional information section.
04/13/2020 to 04/23/2020
$52,905 - $64,009 per year
GS 9 - 11
No
Occasional travel - You may be expected to travel with overnight lodging may be required for meetings, training, workshops, and field/site visits.
No
Permanent
Full-Time
Competitive
11
No
No
20-R8GVJAN-0810-FS2284DH-EC
565331300
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Applications will be accepted from any U.S. citizen. Direct Hire Authority will be used to fill this position. Veterans Preference and traditional rating and ranking of applicants does not apply to this vacancy.
Basic Requirement:
GS-0810:
Degree: Successful completion of a full 4-year course of study in an accredited college or university leading to a bachelor's or higher degree that included a major field of study in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico.
Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A.
Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described for a degree.
Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP eligibles must meet the agency's definition for a quality candidate as provided in the How You Will Be Evaluated section of this announcement to be considered.
This is to notify the public that the USDA, Forest Service is using a Direct Hire Authority to fill this position. For Information on the Office of Personnel Management's Direct Hire Authority, please visit https://www.opm.gov/policy-data-oversight/hiring-information/direct-hire-authority/.
If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is not guaranteed.
The positions are not bargaining unit designated positions.
Forest Service daycare facilities are not available.
Government Housing is not available.
You will be evaluated for this job based on how well you meet the qualifications above.
This is a Direct-Hire Authority position, all applicants who meet the minimum qualifications, to include any selective placement factor(s), if applicable, will be referred to the selecting official. Before a certificate is issued to the selecting official, the resume is reviewed to ensure that you meet all the qualification requirements. A rating will not be used; veteran's preference does not apply due to the existence of the Direct Hire authority for this position.
Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.
To view the application form, visit: https://apply.usastaffing.gov/ViewQuestionnaire/10742333
The following documents are required for your applicant package to be complete. Our office cannot be responsible for incompatible software, illegible fax transmissions, delays in the mail service, your system failure, etc. Encrypted documents will not be accepted. Failure to submit required, legible documents may result in loss of consideration.
Resume that includes: 1) personal information such as name, address, contact information; 2) education; 3) detailed work experience related to this position as described in the responsibilities section including work schedule, hours worked per week, dates of employment; title, series, grade (if applicable); 4) supervisor's phone number and whether or not the supervisor may be contacted for a reference check; 5) other qualifications.
If education is required or you are using education to qualify, you must submit a copy of your college transcripts. An unofficial copy is sufficient with the application; however, if you are selected, you will be required to submit official transcripts prior to entering on duty. Education must have been successfully obtained from an accredited school, college or university. If any education was completed at a foreign institute, you must submit with your application evidence that the institute was appropriately accredited by an accrediting body recognized by the U.S. Department of Education as equivalent to U.S. education standards. There are private organizations that specialize in this evaluation and a fee is normally associated with this service. All transcripts must be in English or include an English translation.
If claiming veteran's preference, you must submit a DD214, Certificate of Release from Active Duty, which shows dates of service and discharge under honorable conditions. If currently on active duty you must submit a certification of expected discharge or release from active duty service under honorable conditions not later than 120 days after the date the certification is submitted. Veteran's preference must be verified prior to appointment. Without this documentation, you will not receive veteran's preference and your application will be evaluated based on the material(s) submitted.
If claiming 10-point veteran's preference you must provide the DD214 or certification requirements (see above bullet), plus the proof of entitlement of this preference as listed on the SF-15 Application for 10-point Veterans' Preference. The SF-15 should be included but is not required. Failure to submit these documents could result in the determination that there is insufficient documentation to support your claim for 10-point preference. For more information on veterans' preference visit FEDSHIREVETS.
Surplus or displaced employees eligible for CTAP, RPL, or ICTAP priority must provide: proof of eligibility (RIF separation notice, notice of proposed removal for declining a transfer of function or directed reassignment to another commuting area, notice of disability annuity termination), SF-50 documenting separation (as applicable), and your most recent SF-50 noting position, grade level, and duty location with your application per 5 CFR 330.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Please view Tips for Applicants - a guide to the Forest Service application process.
Read the entire announcement and all instructions before you begin. You must complete this application process and submit all required documents electronically by 11:59p.m. Eastern Time (ET) on the closing date of this announcement.
Applying online is highly encouraged. We are available to assist you during business hours (8:00a.m. - 4:00p.m. (MST), Monday - Friday. If applying online poses a hardship, contact the Agency Contact listed below well before the closing date for an alternate method. All hardship application packages must be returned to Human Resources no later than noon ET on the closing date of the announcement in order for it to be entered into the system prior to the closing date.
This agency provides reasonable accommodation to applicants with disabilities on a case-by-case basis. Contact the Agency Contact to request this.
To begin, in USAJOBS click "Apply" and follow the instructions to attach your resume and required documents, complete the assessment questionnaire, and submit your application.
NOTE: If a document is resubmitted, it replaces the previous submission, which means the previous document is no longer available to the Human Resources Office. If you are adding to, rather than replacing a previous submission, you must upload both the old document and the new document. You must verify that uploaded documents from USAJOBs transfer into the Agency's staffing system as there is a limitation to the number of documents that can be transferred. However, once in the Agency's staffing system, you will have the opportunity to upload additional documents. Applicants may combine all like required documents (e.g. SF-50s or veteran docs) into one or more files and scan for uploading into the application. Each file must not exceed 3MB. Grouping like documents into files will simplify the application process. Documents must be in one of the following formats: GIF, JPEG, JPG, PDF, PNG, RTF, or Word (DOC or DOCX). Uploaded documents may not require a password, digital signature, or other encryption to open.
Your application will be reviewed to verify that you meet the eligibility and qualification requirements for the position prior to issuing referral lists to the selecting official. If further evaluation or interviews are required, you will be contacted. Log in to your USAJOBS to check your application status.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/565331300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
A career with the Forest Service will challenge you to manage and care for more than 193 million acres of our nation's most magnificent lands, conduct research through a network of forest and range experiment stations and the Forest Products Laboratory, and provide assistance to State and private forestry agencies.
It's an awesome responsibility - but the rewards are as limitless as the views.