This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/579158500. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Help
Summary
This is a public notice flyer to notify interested applicants of anticipated vacancies with the Engineering Division. Applications will NOT be accepted through this flyer. Interested applicants should review the "How to Apply" section of this flyer for more information on how to be considered. This flyer will be used as positions become available. There may or may not be actual vacancies filled from this flyer.
Email resumes & unofficial transcripts: CENAN-HR-VFAIR2@USACE.ARMY.MIL
Help
Overview
- Reviewing applications
-
Open & closing dates
09/18/2020 to 09/30/2020
-
Salary
$49,976 - $115,251 per year
-
Pay scale & grade
GS 7 - 12
-
Location
-
Telework eligible
Yes—as determined by the agency policy.
-
Travel Required
Occasional travel - You may be expected to travel 20% or less for this position.
-
Relocation expenses reimbursed
Yes— Recruitment or relocation incentive MAY be authorized
-
Appointment type
Permanent
-
Work schedule
Full-Time
-
Service
Competitive
-
Promotion potential
12
-
Job family (Series)
-
Supervisory status
No
-
Security clearance
-
Drug test
No
-
Position sensitivity and risk
-
Trust determination process
-
Announcement number
NEFS203880027547HDF
-
Control number
579158500
Help
This job is open to
Clarification from the agency
The intention of this direct hire authority is to appoint qualified candidates who are NOT Department of Defense (DoD) competitive service employees. Current DoD employees are encouraged to apply to merit promotion positions.
Help
Duties
- The Engineering Division is recruiting for Architects (GS-0808) and Civil (GS-0810), Mechanical (GS-0830), Electrical (GS-0850) and General (GS-0801) Engineers for the positions below:
- Cost Engineers - Engineers or Architects: Development of construction cost estimates of civil works (horizontal) and military projects (vertical). Assignments may include design and analysis of significant scope and complexity.
- Technical Managers for Civil Works - Engineers or Architects: Management and execution of engineering studies and designs utilizing Architect Engineer firms or In-house design staff. The projects support our Civil Works and Sandy programs.
- Technical Managers for Military Construction - Engineers or Architects: Management and execution of engineering studies and designs utilizing Architect Engineer firms or In-house design staff for projects within Military Installations.
- Civil Engineers (Hydraulics/Hydrology): Developing, preparing and reviewing designs, layouts, study estimates, schedules and task descriptions, analyses and reports relative to hydraulic and hydrologic civil works, and flood risk management.
- Civil Engineers (Coastal-Hydraulic): Developing, preparing and reviewing designs, layouts, analyses, reports and modeling relative to coastal storm risk management and navigation feasibility studies and detailed project designs for construction.
- Duties and responsibilities will vary and may increase according to the grade level and series of the position.
Help
Requirements
Conditions of Employment
- Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
- Appointment to the position is subject to a two year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315
- Positions may require travel away from the worksite (TDY) to other duty locations 20% or less of the time to conduct site visits and to meet with customers, users, and stakeholders.
- Positions may require a valid, state-issued motor vehicle driver's license since project sites may be located in remote areas that are not accessible by public transportation.
- Incumbent may be required to submit a Financial Disclosure Statement, OGE-450, upon entering the position and annually in accordance with DoD Directive 5500-7-R, Joint Ethics Regulation.
- Positions may be Army Acquisition and Technology Workforce positions. Completion of Level I or II certification (based on grade level) in Facilities Engineering must be achieved within 24 months of placement into this position.
Qualifications
Positions will be filled under the Department of Defense Direct Hire Authority for Certain Competitive Service Positions, 5 USC Section 9905.
Vacancies may be filled at various grade levels based upon management needs and individual qualifications.
Management will determine appropriate series of assignment for the interdisciplinary positions: Cost Engineers and Technical Managers.
Positions are being filled at either the GS-07, GS-09, GS-11 or GS-12 grade level. At the GS-07 through GS-11 level, the incumbent may be non-competitively promoted to the next higher grade when meeting all qualifications and training requirements and recommended by the immediate supervisor.
About The Engineering Division
The Engineering Divisionis the "Core" of New York District having responsibility for the production of technical products, such as studies, plans, specifications and cost estimates in support of the District's Programs, including the Civil Works; Military; and Interagency, International & Environmental Services (IIES) programs. It provides for the program management for the Dam Safety, Levee Safety, Bridge Safety, Hydraulic Structures Safety, and Value Engineering Programs. Finally, the Engineering Division supports emergency operations within and outside of the United States.
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Engineering (General Engineer GS-0801 / Civil Engineer GS-0810/ Electrical Engineer GS-0850 / Mechanical Engineer GS-0830):
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Basic Requirement for Architect (0808):
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
Vacancies may be filled at various grade levels based upon management needs and individual qualifications.
Management will determine appropriate series of assignment for the interdisciplinary positions: Cost Engineers and Technical Managers.
Positions are being filled at either the GS-07, GS-09, GS-11 or GS-12 grade level. At the GS-07 through GS-11 level, the incumbent may be non-competitively promoted to the next higher grade when meeting all qualifications and training requirements and recommended by the immediate supervisor.
About The Engineering Division
The Engineering Divisionis the "Core" of New York District having responsibility for the production of technical products, such as studies, plans, specifications and cost estimates in support of the District's Programs, including the Civil Works; Military; and Interagency, International & Environmental Services (IIES) programs. It provides for the program management for the Dam Safety, Levee Safety, Bridge Safety, Hydraulic Structures Safety, and Value Engineering Programs. Finally, the Engineering Division supports emergency operations within and outside of the United States.
Who May Apply: US Citizens
In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.
Basic Requirement for Engineering (General Engineer GS-0801 / Civil Engineer GS-0810/ Electrical Engineer GS-0850 / Mechanical Engineer GS-0830):
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Basic Requirement for Architect (0808):
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.
Education
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
To Qualify at the Grade Level GS-07 (Cost Engineers and Technical Managers)
Your resume will be reviewed for one year of specialized experience relative to the position(s) for which you are being considered. The specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering or architecture.
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR
(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.
To Qualify at the Grade Level GS-09 (Cost Engineers and Technical Managers)
Your resume will be reviewed for one year of specialized experience relative to the position(s) for which you are being considered. The specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: [insert applicable field(s) of study].
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.
To Qualify at the Grade Level GS-11 (Cost Engineers, Technical Managers, Civil Engineers Hydraulics/Hydrology, and Civil Engineers Coastal-Hydraulic)
Your resume will be reviewed for one year of specialized experience relative to the position(s) for which you are being considered. The specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering, Architecture, Hydrology, Hydraulics.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.
To Qualify at the Grade Level GS-12 (Cost Engineers, Technical Managers, Civil Engineers Hydraulics/Hydrology, and Civil Engineers Coastal-Hydraulic)
Your resume will be reviewed for one year of specialized experience relative to the position(s) for which your resume may be considered. The specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11]).
Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job at the GS-12 grade level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.
Additional information
- This announcement uses the Certain Personnel of the DoD Workforce, Section 1109 NDAA direct hire authority to recruit and appoint qualified candidates to certain positions in the competitive service.
- Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
- You will be required to provide proof of U.S. Citizenship.
- Two year trial/probationary period may be required.
- Direct Deposit of Pay is required.
- Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
- If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
- This is a Career Program (CP) 18 - Engineers and Scientists position.
- Multiple positions may be filled from this announcement.
- Salary includes applicable locality pay or Local Market Supplement.
- Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
- Eligible for situational telework only, including emergency and OPM prescribed "unscheduled telework."
- Recruitment or relocation incentives may be authorized.
- We may use this flyer to fill other similar vacant positions at USACE New York District.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
As vacancies occur, the Human Resources Office will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this flyer. You will be rated based on the information provided in your resume, along with your supporting documentation.
If, after reviewing your résumé and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
Veterans and Military Spouses will be considered along with all other candidates.
If selected, you may be required to provide additional supporting documentation.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
Your complete application includes your resume and other documents which prove your qualifications and eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
- Your resume may be submitted in any format and must support the specialized experience described in this announcement.
- If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
- For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
- For additional information see: What to include in your resume.
- Cover Letter, optional
- This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
Interested Applicants must submit resumes and unofficial transcripts via e-mail to: CENAN-HR-VFAIR2@USACE.ARMY.MIL
Enter, in the subject of the e-mail, the position of interest: Cost Engineer, Technical Management Civil Works, Technical Management Military Construction, Civil Engineer Hydraulics/Hydrology, or Civil Engineer Coastal-Hydraulics.
To apply for this position, you must submit the documentation specified in the Required Documents section above. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
Alternate applications (e.g., facsimile applications) will not be accepted.
The complete application package must be submitted to the email address provided above by 11:59 PM (EST) on 09/30/2020 to receive consideration.
Agency contact information
Engineering Division
- Address
-
FS-APF-W2SF02 US ARMY ENGINEER DISTRICT, NEW YORK
DO NOT MAIL
New York, NY 10278
US
Next steps
Eligible applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.
Acknowledgement and Notice of Results letters will be sent by the hiring office.
The evaluation will be based on the information you provide. You should expect that we will verify performance, suitability, and security information and take that information into account in making employment offers.
Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Help
Required Documents
Your complete application includes your resume and other documents which prove your qualifications and eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further.
1. Your resume:
- Your resume may be submitted in any format and must support the specialized experience described in this announcement.
- If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy.
- For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.e., HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
- For additional information see: What to include in your resume.
- Cover Letter, optional
- This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: Transcripts and Licenses
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Help
Learn more about this agency
How to Apply
Interested Applicants must submit resumes and unofficial transcripts via e-mail to: CENAN-HR-VFAIR2@USACE.ARMY.MIL
Enter, in the subject of the e-mail, the position of interest: Cost Engineer, Technical Management Civil Works, Technical Management Military Construction, Civil Engineer Hydraulics/Hydrology, or Civil Engineer Coastal-Hydraulics.
To apply for this position, you must submit the documentation specified in the Required Documents section above. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.
Alternate applications (e.g., facsimile applications) will not be accepted.
The complete application package must be submitted to the email address provided above by 11:59 PM (EST) on 09/30/2020 to receive consideration.
Agency contact information
Engineering Division
- Address
-
FS-APF-W2SF02 US ARMY ENGINEER DISTRICT, NEW YORK
DO NOT MAIL
New York, NY 10278
US
Next steps
Eligible applicants will be referred to the hiring manager. The selecting official may choose to conduct interviews.
Acknowledgement and Notice of Results letters will be sent by the hiring office.
The evaluation will be based on the information you provide. You should expect that we will verify performance, suitability, and security information and take that information into account in making employment offers.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Beginning of a dialog window for the agency announcing this job. It begins with a heading 2 called "Learn more about Field Operating Offices of the Office of the Secretary of the Army". Escape will cancel and close the window.
Learn more about
U.S. Army Corps of Engineers
Looking for a great place to work? The U.S. Army Corps of Engineers is one of the best! In 2019, USACE ranked number three of government large-agency subcomponents! As rated by their employees, USACE supervisors strongly support employee development and opportunities to demonstrate leadership skills, while also maintaining an optimal work/life balance. The Corps offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines.
Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.
Agency contact information
Engineering Division
- Address
-
FS-APF-W2SF02 US ARMY ENGINEER DISTRICT, NEW YORK
DO NOT MAIL
New York, NY 10278
US