This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/553347700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Help
Summary
This position is located in the Department of Labor (DOL), Mine Safety and Health Administration (MSHA), Pittsburgh Safety and Health Technology Center, Roof Control Division located in South Park, PA.
- This position is inside the bargaining unit.
- Additional selections may be made from this announcement.
- Selection can be made from any advertised grade(s).
- Relocation Bonus, PCS Expense and Recruitment Incentives are not authorized.
Help
Overview
- Reviewing applications
-
Open & closing dates
12/04/2019 to 12/25/2019
-
Salary
$43,213 - $99,652 per year
-
Pay scale & grade
GS 07 - 12
-
Location
2 vacancies in the following location:
-
Telework eligible
Yes—as determined by the agency policy.
-
Travel Required
Occasional travel - 10%
-
Relocation expenses reimbursed
No
-
Appointment type
Permanent
-
Work schedule
Full-Time
-
Service
Competitive
-
Promotion potential
12 - There is no obligation to provide future promotions if you are selected. Promotions are dependent on your ability to perform the duties at a higher level, meet all the performance requirements, and supervisor’s recommendation to the next grade.
-
Job family (Series)
-
Supervisory status
No
-
Security clearance
-
Drug test
Yes
-
Announcement number
DE-20-PHIL-MSHA-0018
-
Control number
553347700
Help
This job is open to
-
The public
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
-
Career transition (CTAP, ICTAP, RPL)
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Clarification from the agency
U.S. Citizens; CTAP/ICTAP eligibles in the local commuting area of South Park, PA. Also advertised as job #MS-20-PHIL-MSHA-0039 for status applicants current or former Federal employees; VEOA eligibles; Land and Base Management Workforce Flexibility Act eligibles; Military Spouse eligibles. To be considered for each, apply to BOTH jobs.
Help
Duties
MAJOR DUTIES
As a senior-level engineer, the incumbent is responsible for the independent planning and execution of projects related to complex safety problems at mining operations throughout the United States. The incumbent employs basic and advanced engineering concepts and applied research techniques in executing duties, and transfers the results of complex studies to practical applications. Due to the diverse workload of the Division, the incumbent will work in the area of underground ground control evaluating pillar stability, multiple seam interactions, and the effectiveness of support methods, as well as perform investigations of ATRS systems, cabs, and canopies.
Examples of such duties include, but are not limited to, the following:
- Evaluates the needs of the mining industry regarding roof control technology and initiates programs to improve the state-of-the-art in this area. (20%)
- Performs field investigations of roof control problems in underground mines and utilizes rock mechanics techniques to provide useful information to mine operators and MSHA inspection personnel in determining potential changes to improve roof stability. Conducts in-mine investigations and analyses of cabs, canopies, and automated devices proposed for use in lieu of cabs and canopies to determine if they are technically acceptable and practically sound. (20%)
- Evaluates complex roof control plans, addendums, or mining proposals for adequacy related to ground control and pillar stability. (20%)
- Attends meetings and conferences with Federal, State, and private organizations to obtain and provide information relative to ground control. Keeps abreast of technological developments in the field of the roof and/or ground control through contacts with the mining industry and government agencies and thorough review of relevant literature. (20%)
- Designs complex laboratory investigations to determine the qualities of roof support systems to define their applicability to unique mining situations. The incumbent leads a team of engineers and technicians in the execution of such studies, and prepares reports of subsequent findings in a timely manner. (10%)
- Prepares and presents ground control related training materials involving ground control, particularly on new technologies that can improve current industry methods. Audiences will include MSHA personnel, other government officials, and industry stakeholders. (10%)
The GS-7 is a lower level position and the incumbent will perform duties under more restricted supervisory controls and with lesser complexity. Duties at the GS-09 and GS-11 are development leading up to the full performance level of the GS-12.
Help
Requirements
Conditions of Employment
- Appointment to this position may require a background investigation.
- Requires medical exam and must maintain physical requirements.
- Requires a probationary period if the requirement has not been met.
- Must be at least 16 years old and a U.S. Citizen.
- Subject to pre-employment and random drug tests.
- Subject to financial disclosure requirements.
Applicants must meet all legal and regulatory requirements. Reference the "Required Documents" section for additional requirements.
Qualifications
This position has an Individual Occupational Requirement (IOR) that must be met in addition to meeting the specialized experience.
Basic Requirements:
- Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
- Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
- Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
- Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional
- Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as
described in paragraph A. - Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
AND
GS-07: In addition to meeting the basic entry qualification requirements, applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-5, in the Federal Service.
Examples of specialized experience include two or more of the following:
- Exposure to ground control problems in underground mines.
- Knowledge of cabs, canopies, or automated temporary roof support systems.
- Field investigations evaluating the effectiveness of new or novel roof support systems.
- Assists in developing or evaluating basic roof/ground control plans and/or pillar stability analyses.
GS-09: In addition to meeting the basic entry qualification requirements, applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-7, in the Federal Service.
Examples of specialized experience include two or more of the following:
- Exposure to field investigations of ground control problems in underground mines.
- Field investigations of cabs, canopies, or automated temporary roof support systems.
- Field investigations evaluating the effectiveness of new or novel roof support systems.
- Conducting basic laboratory investigations to evaluate the qualities of new or novel roof support systems.
- Developing or evaluating basic roof/ground control plans and/or pillar stability analyses.
GS-11: In addition to meeting the basic entry qualification requirements, applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-9, in the Federal Service.
Examples of specialized experience include two or more of the following:
- Conducting field investigations of ground control problems, including evaluations of roof or rib falls, multiple seam interactions, or burst prone areas.
- Field investigations of cabs, canopies, or automated temporary roof support systems.
- Field investigations evaluating the effectiveness of new or novel roof support systems.
- Designing complex laboratory investigations to evaluate the qualities of new or novel roof support systems.
- Developing or evaluating complex roof/ground control plans and/or pillar stability analyses.
- Prepares and presents ground control training materials.
GS-12: In addition to meeting the basic entry qualification requirements, applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-11, in the Federal Service.
Examples of specialized experience include two or more of the following:
- Independently conducting field investigations of ground control problems, including evaluations of roof or rib falls, multiple seam interactions, or burst prone areas.
- Field investigations of cabs, canopies, or automated temporary roof support systems.
- Field investigations evaluating the effectiveness of new or novel roof support systems.
- Independently designing complex laboratory investigations to evaluate the qualities of new or novel roof support systems.
- Independently developing or evaluating complex roof/ground control plans and/or pillar stability analyses.
- Independently prepares and presents ground control training materials.
IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE.
Education
To qualify for this position solely on education, in addition to meeting the basic education requirement, the following education may be used to substitute for specialized experience:
Education may be used to substitute for specialized experience for the following grade levels:
GS-7 1 year of graduate-level education or superior academic achievement.
GS-9 2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree, if related.
GS-11 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree, if related.
GS-12 No educational substitution.
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum course work requirements for this position. Click Evaluation of Foreign Education for more information.
Additional information
DOL seeks to attract and retain a high performing and diverse workforce in which employees’ differences are respected and valued to better meet the varying needs of the diverse customers we serve. DOL fosters a diverse and inclusive work environment that promotes collaboration, flexibility and fairness so that all individuals are able to participate and contribute to their full potential.
Refer to these links for more information: GENERAL INFORMATION, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES
All MSHA employees and their spouses, and minor children are prohibited by regulation from having any interest, direct or indirect, in any mine or mining company which may be directly affected by the work of MSHA through its investigations, technical research, or other activities. These interests are prohibited under the Department of Labor's Supplemental Standards of Ethical Conduct Regulations at 5 CFR 5201.105. Certain MSHA employees are required to file a financial disclosure report. For questions, please contact the vacancy contact on this announcement.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.
Categories: Category A - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity. Category B - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position. Category C - Meets the specialized experience described in the minimum qualifications requirements section of this announcement and demonstrates proficiency in the basic competencies.
Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:
Analysis/Problem Solving: Professional knowledge of mining engineering principles/practices supplemented by a minimum of three years’ experience applicable to the full range of engineering duties concerned with the use of rock mechanics techniques to enhance roof control technology and the analysis and design of roof support systems. Thorough knowledge of computer techniques applicable to the analysis of pillar stability, multiple seam interactions, modeling of underground openings, and the discernment of experimental data. Familiarity with the availability and use of state-of-the-art rock mechanics instrumentation and the ability to adapt them and/or develop new means to suit the requirements of specific investigations. MSHA Knowledge: Knowledge of 30 CFR, Mine Act, Coal and Metal/Nonmetal roof/ground control procedures and underground mining methods. Consulting: Ability to represent the Agency in a professional and effective manner when consulting or coordinating within the Agency or external organizations on projects. Interpersonal/Communication: Ability to work in a team and reach consensus Writing: Ability to prepare concise technical reports with minor supervisory editing or revisions for distribution among stakeholders based on information gathered from field investigations, lab tests, and literature searches incorporating tables, graphs, and diagrams. Skill in preparing multi-media presentations.
The information you provide may be verified by a review of your work experience and/or education, by checking references and through other means (ex. interview). The examining Human Resources Office (HRO) makes the final determination concerning applicant ratings. Your resume MUST provide sufficient information to substantiate your responses to the vacancy questions. If not, the HRO may amend your responses to more accurately reflect the level of competency indicated by the content of your resume. Your evaluation may also include a review by a Human Resources Specialist or panel and may include other assessments (ex. interview, panel review, written test, writing sample, etc.)
INFORMATION FOR ICTAP/CTAP ELIGIBLES ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligibles who are placed into Category [B] or higher will be considered "well-qualified".
Click Application of Veterans Preference for Category Rating Jobs for more information.
To preview questions please click here.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date. You are not required to submit a document if it does not apply to you. Warning: If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission. Also, do not upload password protected documents.
- Veterans Documents (if applicable): To be considered as a 5-point preference eligible, you must submit a copy of your Certificate of Release or Discharge From Active Duty, DD214. Your DD-214 must show the type of discharge and dates of active duty. To claim 10-point preference, you must submit a copy of your DD214; an Application for 10-point Veteran's Preference, SF15; and the proof of entitlement of this preference which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. (For active duty service members expecting honorable or general discharge or release within 120 days, click Active Duty). Without this documentation, you will not receive veteran's preference. For more information, go to: http://www.fedshirevets.gov/hire/hrp/vetguide/index.aspx
- Displaced Employee Placement Documents – Only required if requesting priority consideration under CTAP or ICTAP eligibility.
- Cover Letters are not mandatory and will not be used to verify experience, but may be submitted
Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.
– Unofficial Transcript(s) (in English) - submit if using education as a basis for qualifying for this position. If so, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PHD, etc). If specific course work is required to qualify, you must supply transcripts from each academic institution in which the required courses were taken in order to receive credit.
You may upload your transcript(s) as one document (3 MB size limit). If over 3 MB, please submit via fax feature.
OFFICIAL Transcripts MUST BE RECEIVED prior to selection and report date. Reference the “Education Section” for College Transcript and Evaluation of Foreign Education.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
To apply for this position, you must complete the initial online application, to include submission of the required documentation specified in the Required Documents section.
Follow the steps below to apply. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time (ET) on the vacancy closing date to receive consideration. Paper applications and supplemental documents submitted in any other manner without prior approval from the vacancy contact will not be considered. Click here for information on Reasonable Accommodations.
SAVE your information before the 30 MINUTE TIMEOUT! For help, go to https://www.usajobs.gov/Help/how-to/.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents
Your resume must provide sufficient information to substantiate your responses in the self-assessment vacancy questions. If not, HR may amend your responses to more accurately reflect the competency indicated by resume content. FOR EACH EMPLOYMENT PERIOD, include: start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week); otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS)
Once you have identified a job on www.usajobs.gov that you wish to apply for, click on the title and click the Apply button . For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Click “Start Application” and proceed through 5 steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. At Step 5, click “Continue to Agency Site”.
STEP 3 – Complete the 2nd part of the application process (DOL)
On the Department of Labor (DOL) page, create a DOL Account if you have not already and click “APPLY TO THIS VACANCY”. Continue through the 7 progress steps indicated by circles at the top of the DOL page. The 3rd progress step is where you answer the vacancy specific questions. The 4th progress step "Documents" is where you submit required documents (only if applicable to you) specified in the "Required Documents" section of this vacancy. If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission.
STEP 4 – On the “Review and Submit” step, click “Submit Application”
The last “Confirmation” step will turn green noting that your application was submitted successfully.
STEP 5 - Edit Application as needed by 11:59 pm ET of Closing Date by returning to USAJOBS, clicking the vacancy, then “Update Application”.
Agency contact information
Lissette Baez
- Address
-
Labor, Mine Safety and Health Administration
The Curtis Center
170 S. Independence Mall West
Suite 600 East
Philadelphia, Pennsylvania 19106
United States
Next steps
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interview. You will be notified of the outcome. A selection is expected to be made within 30 calendar days from the issuance date of the certificate.
For instructions on how to check the status of your application, go to Step 7 on: Using DOORS and USAJOBS Help Guide. To sign up for Application Status Updates via email: Click Here for instructions.
Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Help
Required Documents
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date. You are not required to submit a document if it does not apply to you. Warning: If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission. Also, do not upload password protected documents.
- Veterans Documents (if applicable): To be considered as a 5-point preference eligible, you must submit a copy of your Certificate of Release or Discharge From Active Duty, DD214. Your DD-214 must show the type of discharge and dates of active duty. To claim 10-point preference, you must submit a copy of your DD214; an Application for 10-point Veteran's Preference, SF15; and the proof of entitlement of this preference which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. (For active duty service members expecting honorable or general discharge or release within 120 days, click Active Duty). Without this documentation, you will not receive veteran's preference. For more information, go to: http://www.fedshirevets.gov/hire/hrp/vetguide/index.aspx
- Displaced Employee Placement Documents – Only required if requesting priority consideration under CTAP or ICTAP eligibility.
- Cover Letters are not mandatory and will not be used to verify experience, but may be submitted
Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.
– Unofficial Transcript(s) (in English) - submit if using education as a basis for qualifying for this position. If so, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, PHD, etc). If specific course work is required to qualify, you must supply transcripts from each academic institution in which the required courses were taken in order to receive credit.
You may upload your transcript(s) as one document (3 MB size limit). If over 3 MB, please submit via fax feature.
OFFICIAL Transcripts MUST BE RECEIVED prior to selection and report date. Reference the “Education Section” for College Transcript and Evaluation of Foreign Education.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Help
Learn more about this agency
How to Apply
To apply for this position, you must complete the initial online application, to include submission of the required documentation specified in the Required Documents section.
Follow the steps below to apply. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time (ET) on the vacancy closing date to receive consideration. Paper applications and supplemental documents submitted in any other manner without prior approval from the vacancy contact will not be considered. Click here for information on Reasonable Accommodations.
SAVE your information before the 30 MINUTE TIMEOUT! For help, go to https://www.usajobs.gov/Help/how-to/.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents
Your resume must provide sufficient information to substantiate your responses in the self-assessment vacancy questions. If not, HR may amend your responses to more accurately reflect the competency indicated by resume content. FOR EACH EMPLOYMENT PERIOD, include: start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week); otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS)
Once you have identified a job on www.usajobs.gov that you wish to apply for, click on the title and click the Apply button . For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Click “Start Application” and proceed through 5 steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. At Step 5, click “Continue to Agency Site”.
STEP 3 – Complete the 2nd part of the application process (DOL)
On the Department of Labor (DOL) page, create a DOL Account if you have not already and click “APPLY TO THIS VACANCY”. Continue through the 7 progress steps indicated by circles at the top of the DOL page. The 3rd progress step is where you answer the vacancy specific questions. The 4th progress step "Documents" is where you submit required documents (only if applicable to you) specified in the "Required Documents" section of this vacancy. If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission.
STEP 4 – On the “Review and Submit” step, click “Submit Application”
The last “Confirmation” step will turn green noting that your application was submitted successfully.
STEP 5 - Edit Application as needed by 11:59 pm ET of Closing Date by returning to USAJOBS, clicking the vacancy, then “Update Application”.
Agency contact information
Lissette Baez
- Address
-
Labor, Mine Safety and Health Administration
The Curtis Center
170 S. Independence Mall West
Suite 600 East
Philadelphia, Pennsylvania 19106
United States
Next steps
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interview. You will be notified of the outcome. A selection is expected to be made within 30 calendar days from the issuance date of the certificate.
For instructions on how to check the status of your application, go to Step 7 on: Using DOORS and USAJOBS Help Guide. To sign up for Application Status Updates via email: Click Here for instructions.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Beginning of a dialog window for the agency announcing this job. It begins with a heading 2 called "Learn more about Field Operating Offices of the Office of the Secretary of the Army". Escape will cancel and close the window.
Learn more about
Mine Safety and Health Administration
Agency contact information
Lissette Baez
- Address
-
Labor, Mine Safety and Health Administration
The Curtis Center
170 S. Independence Mall West
Suite 600 East
Philadelphia, Pennsylvania 19106
United States