This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/813181100. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
This National Guard position is for a AIRCRAFT ENGINE MECHANIC, Position Description Number D1635000and is part of 155 MXMP, Nebraska Air National Guard.
10/08/2024 to 09/26/2025
$27.72 - $36.15 per hour
Announcement is open until filled; First review will be 22 Oct 2024 with a review every 7 days thereafter.
WG 8 - 10
1 vacancy in the following location:
No
Yes—as determined by the agency policy.
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
10
No
No
NE-12570082-AF-25-005
813181100
Current federal employees of the hiring agency that posted the job announcement.
Current members, those who want to join or transitioning military members.
Nebraska National Guard Area 1, 2 and 3 applicants
As a AIRCRAFT ENGINE MECHANIC, WG-8602-8/10, duties include:
(1) Troubleshoots malfunctioning engines and interrelated propulsion system components, determines degree of disassembly or certification required, repairs or replaces defective components, diagnostic computers and associated hardware. Analyzes malfunctions using schematic and wiring diagrams, blueprints, manufacturer's specifications, computer diagnostics data, inspection findings, trending data and aircrew debriefs. Performs engine run operation on installed and uninstalled engines to troubleshoot malfunctions or verify findings. Removes and installs engines and auxiliary power units. Operates, Automated Ground Test Systems (AGETS), trouble-shoots and repairs aircraft jet engines.
(2) Troubleshoots, modifies, repairs, and performs sequential disassembly and assembly of gearboxes and auxiliary power units. Performs evaluations that must be accomplished at critical points in the repair/build-up process using a variety of quality characteristics, consisting of complete systems or components and assemblies that undergo many steps in a repair process and have highly critical tolerances. Performs test cell operation of engine and aircraft run up, analyzes operating parameters, makes final adjustments and verifies that engine is operating within acceptable parameters for safe operation in the aircraft.
(3) Performs scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems. Interprets Engine Management trend data and investigates trend anomalies to eliminate catastrophic engine failure or damage by the prediction and detection of adverse trends towards known failure modes before they occur.
(4) Performs command directed and locally established in-progress inspections (IPI) (certifying acceptable performance of all conventional or modified aircraft engines prior to their being installed in the aircraft or placed in inventory) of propulsion system components and associated equipment to determine adequacy of workmanship, materials and maintenance. Makes final certification of completed work and critical engine build measurements, annotating by signature that work and tolerances are correct. Certifies aircraft is safe for flight by Clearing Red X and other Red symbols.
(5) Requisitions, processes, and accounts for supply assets as required by the repairable processing system. Verifies compatibility of engine components. Performs computer data entry of engine and component information such as component location, status and tracking information into the Core Automated Maintenance System (CAMS) for fighter aircraft, and G081, (CAMS for Mobility) for multi-engine transport aircraft. Uses computer-based systems to account for time expenditures of maintenance performed.
(6) Provides technical advice and troubleshooting expertise to other work centers when propulsion systems affect or are affected by interrelated aircraft systems, such as: electro-environmental, pneudraulic, fuel and avionics systems.
(7) Provides on-the-job training to lower graded personnel or newly assigned personnel regardless of grade. Trains lower graded employees on proper certification techniques of installed engine components. Provides instruction in repair and inspection techniques of aircraft engine components and related equipment.
(8) Examines recurring malfunctions and initiates corrective actions by submission of quality deficiency or software deficiency reports. Devises repair procedures based on findings and recommends program changes or data corrections to correct software or technical data deficiencies. Recommends revisions to intermediate maintenance directives when necessary.
(9) Serves as the hazardous materials manager as required. Interprets and follows state and federal regulations regarding the reclamation, storage and transportation of hazardous materials.
(10) Prepares for and participates in various types of readiness evaluations such as Operational Readiness Inspections (ORI), Inspector General (IG) Inspections, Unit Effectiveness Inspections and mobility and command support exercises. Performs additional duties such as, hydrazine response, aircraft or equipment decontamination, structural fire fighting, fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operator, maintenance of facilities and equipment, and assists local authorities during natural disasters or civil emergencies.
(11) Performs other duties as assigned.
There is no substitution of education for this position.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. Your answers to the assessment questionnaire will be verified against information provided in your resume and other supporting documentation. Be sure that your resume clearly supports your responses to all the questions addressing experience and education relevant to this position.
In describing your experience, please be clear and specific, we will not make assumptions regarding your experience. If, after reviewing your resume and supporting documentation, a determination is made that you have inflated your qualifications or experiences, your rating will be adjusted or you may be excluded from consideration for this position.
Your qualifications will be evaluated against general and specialized experience under the "Qualifications" section and against the following competencies (knowledge, skills, abilities and other characteristics):
Aircraft Maintenance, Attention to Detail, and KNOWLEDGE OF EQUIPMENT ASSEMBLY, INSTALLATION, REPAIR, ETC.
To preview the assessment questionnaire, please use the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12570082
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
Use this link for Resume Tips.
2. Other supporting documents (optional)
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
A complete application package must be submitted by 11:59 PM (Eastern) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Qualified candidates will be referred to the selecting official in the following order:
1. Fully qualified Area 1 applicants
2. Fully qualified Area 2 applicants
3. Fully qualified Area 3 applicants
INDIVIDUAL SELECTED AS A WG-08 TRAINEE MAY BE PROMOTED TO WG-10 UPON COMPLETION OF THE FOLLOWING: (1) 6 MONTHS OF EXPERIENCE APPOINTED IN THE POSITION; (2) COMPLETION OF AN INDIVIDUAL DEVELOPMENT PLAN (IDP); AND (3) COMPLETION OF A CLASSIFICATION REVIEW. INDIVIDUAL MAY BE PROMOTED WITHOUT FURTHER COMPETITION WHEN QUALIFIED AND RECOMMENDED BY THE SELECTING OFFICIAL; HOWEVER PROMOTION IS NOT GUARANTEED. APPLICANTS MUST INDICATE ON THEIR APPLICATION THE LOWEST GRADE FOR WHICH THEY WISH TO BE CONSIDERED.
THE MAN YEAR FOR THIS POSITION IS OBLIGATED TO A TECHNICIAN ON MILITARY DUTY. SELECTEE MAY BE DISPLACED UPON RETURN OF THE INCUMBENT OR SELECTEE MAY BE CONVERTED TO PERMANENT APPOINTMENT IF THE INCUMBENT DOES NOT REQUEST REEMPLOYMENT. INDEFINITE EMPLOYMENT IS TEMPORARY IN NATURE AND WILL LAST MORE THAN ONE YEAR BUT NO MORE THAN SIX YEARS. BENEFITS ARE THE SAME AS A PERMANENT APPOINTMENT.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/813181100. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.