This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/805425800. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Help
Overview
- Job canceled
-
Open & closing dates
08/19/2024 to 09/01/2024
This job will close when we have received 100 applications which may be sooner than the closing date. Learn more -
Salary
$66,731 - $117,866 per year
-
Pay scale & grade
GS 9 - 12
-
Location
5 vacancies in the following location:
-
Remote job
No
-
Telework eligible
Yes—as determined by the agency policy. DLA telework-eligible positions require at least 60% in office time (Tuesday, Wednesday, and Thursday each week). For those eligible and with supervisory approval, regular and recurring telework may be requested Monday and/or Friday only.
-
Travel Required
Occasional travel - You may be expected to travel for this position.
-
Relocation expenses reimbursed
No
-
Appointment type
Permanent
-
Work schedule
Full-time
-
Service
Competitive
-
Promotion potential
12
-
Job family (Series)
-
Supervisory status
No
-
Security clearance
-
Drug test
No
-
Financial disclosure
<a href="https://help.usajobs.gov/working-in-government/fair-and-transparent/financial-disclosure" target="_blank">No</a>
-
Bargaining unit status
-
Announcement number
DLALndMartm-24-12519037-DHA
-
Control number
805425800
Help
This job is open to
Clarification from the agency
This is a Direct Hiring Authority (DHA) Notice open to the Public using the Authority for Certain Personnel of the Department of Defense (consolidated DHA).
Help
Duties
- If selected at the GS-09 or GS-11 level, the below responsibilities will be performed in a developmental capacity.
- Serves as professional engineer, expert test engineering consultant, and advisor within the electronics engineering discipline with responsibility for developing test plans
- and interpreting specifications to verify adherence of parts to quality and reliability requirements.
- Establish test requirements/techniques according to theoretically proven means and by use of empirical methods and techniques; interprets test results;
- plans and develops methods for use in the study of pass/fail trends; determines when problems exist with specification or standard test methods or procedures.
- Review, analyze and evaluate technical engineering information in test reports and other pertinent technical documentation in order to determine failure or acceptability status; while assuring the validity of reports.
- Serves as a technical authority in making engineering decisions leading to the proper selection, testing, and evaluation of electronic devices.
- Develop, evaluate, and review programs for computer controlled automated test equipment (ATE) to test and evaluate electronic devices.
- Develops and designs test circuits, measurement equipment and/or mechanical configurations required to implement correct test technique.
- Skill in the use of electronic test equipment such as computer controlled automated test equipment (ATE), oscilloscopes, pulse and signal generators, network analyzers, digital data generators,
- digital voltmeters, frequency generators, and special test equipment; and in the use of a variety of hand tools such as screwdrivers, drills, wrenches, and soldering irons.
Help
Requirements
Conditions of Employment
- Must be a U.S. citizen
- Tour of Duty: Flexible
- Security Requirements: Non-Critical Sensitive
- Appointment is subject to the completion of a favorable suitability or fitness determination, where reciprocity cannot be applied; unfavorably adjudicated background checks will be grounds for removal.
- Fair Labor Standards Act (FLSA): GS-12: Exempt; 09/11: Non-Exempt
- Selective Service Requirement: Males born after 12-31-59 must be registered or exempt from Selective Service.
- Recruitment Incentives: Recruitment, Relocation, and SLRP Incentive May Be Authorized.
- Bargaining Unit Status: Yes
- Pre-Employment Physical: Not Required
- Defense Acquisition Workforce position. Must complete DoD certification and other requirements. See Addtl Info.
Qualifications
To qualify for an Electronics Engineer your resume and supporting documentation must support:
A. Basic Education Requirements:
1. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics OR,
2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
a. Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
b. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph 1.Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
c. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
d. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to perform successfully the duties of the position, and that is in or related to the work of this position. To qualify at the GS-09 level, applicants must possess one year of specialized experience must b equivalent to the GS-07 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-11 level, applicants must possess one year of specialized experience must be equivalent to the GS-09 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-12 level, applicants must possess one year of specialized experience must be equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including minimum qualifications and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes:
GS-09 Level:
A. Basic Education Requirements:
1. Degree: professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics OR,
2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
a. Professional registration -- Current registration as a professional engineer by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
b. Written Test -- Evidence of having successfully passed the Engineer-in-Training (EIT) examination, or the written test required for professional registration, which is administered by the Boards of Engineering Examiners in the various States, the District of Columbia, Guam, and Puerto Rico. Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph 1.Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination.
c. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of a professional engineering curriculum as described in paragraph A.
d. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in engineering technology or in an appropriate professional field, e.g., physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
B. Specialized Experience: One year of specialized experience that equipped you with the particular competencies to perform successfully the duties of the position, and that is in or related to the work of this position. To qualify at the GS-09 level, applicants must possess one year of specialized experience must b equivalent to the GS-07 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-11 level, applicants must possess one year of specialized experience must be equivalent to the GS-09 level or equivalent under other pay systems in the Federal service, military or private sector. To qualify at the GS-12 level, applicants must possess one year of specialized experience must be equivalent to the GS-11 level or equivalent under other pay systems in the Federal service, military or private sector. Applicants must meet eligibility requirements including minimum qualifications and any other regulatory requirements by the cut-off/closing date of the announcement. Creditable specialized experience includes:
GS-09 Level:
- Assisting in writing test programs for the computer controlled automated test equipment (ATE).. Assisting in designing and developing novel electrical test circuits and fixtures.
- Assisting in testing electronic devices, sub- assemblies and assemblies,
- Employing computer controlled, state-of-the-art, electronic test systems.
- Preparing test programs for the computer controlled automated test equipment (ATE).. Designing and developed novel electrical test circuits and fixtures.
- Preparing setup of testing electronic devices, sub- assemblies and assemblies,
- Employing computer controlled, state-of-the-art, electronic test systems.
- Writing test programs for the computer controlled automated test equipment (ATE. Designing and developing electrical test circuits and fixtures.
- Testing electronic devices, sub- assemblies and assemblies,
- Employing computer controlled, state-of-the-art, electronic test systems.
Education
C. Education Substitution: Such education must demonstrate the knowledge, skills, and abilities necessary to do the work. Education must be from a college or university accredited by an organization approved by the U.S. Department of Education. See http://ope.ed.gov/accreditation/Search.aspx. If using education to meet basic qualifications, YOU MUST SUBMIT A TRANSCRIPT as supplemental documentation. To qualify based on education in lieu of specialized experience, you must possess:
To Be GS-09: Two years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree. Such education must have provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
To Be GS-11: Three years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree. Such education must have provided the knowledge, skills, and abilities necessary to perform the work of the position being filled.
To Be GS-12: Education cannot be substituted for specialized experience at this grade level.
D. Combination: Combinations of successfully completed post-high school education and experience may be used to meet total qualification requirements for grade levels GS-09, and GS-11 and may be computed by first determining the applicants total qualifying experience as a percentage of the experience required for the
grade level; then determining the applicant's education as a percentage of the education required for the grade level; and then adding the two percentages. The total percentages must equal at least 100 percent to qualify an applicant for that grade level. Only graduate education in excess of the amount required for the next lower grade level may be used to qualify applicants for positions at grade GS-09 and GS-11.
E. Additional Experience and Training Provisions for Graduates of Engineering Programs: A combination of superior academic achievement and 1 year of appropriate professional experience is qualifying at GS-9. Completion of such a program and 1 year of appropriate professional experience is qualifying at grade GS-9.
Education must be from an accredited college recognized by the Secretary, U.S. Department of Education. If using education completed outside the U.S., it must be submitted to a private organization that specializes in interpretation of foreign educational credentials and such education has been deemed at least equivalent to that gained in conventional U.S. education programs. YOU MUST SUBMIT TRANSCRIPTS. Failure to submit transcripts will result in a rating of ineligible.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.
GS:12: Substitution of education may not be used in lieu of specialized experience for this grade level.
Are you using your education to qualify? You MUST provide transcripts or other documentation to support your educational claims. Unless otherwise stated: Unofficial transcripts are acceptable at time of application.
GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours that your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show that the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
Additional information
Position requires DoD Acquisition Engineering & Tech Management (N) / ETM, Foundational certification within required timeframes. Selectee must also achieve 80 hours of Continuous Learning Points (CLPs) every 2-years. Click here for more details and Resources.
For Important General Applicant Information and Definitions go to: http://www.dla.mil/portals/104/documents/careers/GenAppInfoDef.pdf
Reemployed Annuitants: This position does not meet criteria for appointment of Reemployed Annuitants. The DoD criteria for hiring Reemployed Annuitants can be found at: http://www.esd.whs.mil/Portals/54/Documents/DD/issuances/140025/1400.25-V300.pdf
Drug-Free Workplace: The Defense Logistics Agency (DLA) has established a Drug-Free Federal Workplace Policy. All applicants tentatively selected for DLA employment in a testing designated position are subject to urinalysis to screen for illegal drug use prior to appointment. Applicants who refuse to be tested will be denied employment with DLA for a period of six months. This policy extends to random testing for the use of illegal drugs by employees who occupy testing designated positions defined as sensitive in Section 7(d) of Executive Order 12564. The Defense Logistics Agency's Drug Free Workplace Plan's drug testing panel includes testing for the following illegal substances: marijuana, cocaine, opiates (codeine/morphine), 6-Acetylmorphine (heroin), phencyclidine, amphetamines (amphetamine/methamphetamine), methylenedioxymethamphetamine (MDMA), methylenedioxyamphetamine (MDA), oxycodone, oxymorphone, hydrocodone, and hydromorphone. ADVISORY: By using cannabidiol (CBD) products you are risking a positive drug test result for marijuana.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How You Will Be Evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Direct Hire Evaluation: Once the application process is complete, a review of your application will be made to ensure you meet the job requirements. This vacancy will be filled through a Direct Hire Authority. All applicants who meet the basic qualification requirements will be forwarded to the Selecting Official for consideration. The rule of Three, Veteran's Preference and traditional rating and ranking of applicants do not apply to this vacancy. We will evaluate your application for basic eligibility and to determine if your experience meets the basic qualification requirements described in the announcement. All applicants who meet the qualifications and other basic requirement are eligible for referral and selection consideration. Please follow all instructions carefully. Errors or omissions may affect your rating.
Benefits
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Required Documents
As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies.
To apply for this position you must provide a complete Application Package. Each Application Package MUST include:
- Your Resume listing work schedule, hours worked per week, dates of employment and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for the qualifications and referred for selection consideration if eligible. IMPORTANT NOTE: Ensure that your resume does not contain any specialized characters, fonts, typefaces or formatting (e.g. tables, macros, etc.). It is also recommended that you convert/save your resume as a PDF prior to attaching to your application.
- Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
How to Apply
This job will close when the agency has received 100 applications, which may be sooner than the closing date
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
The complete application package must be submitted by 11:59 PM (EST) on the closing date to receive consideration.
- To begin, click Apply Online to access an online application. Follow the prompts to select your USAJOBS resume and/or other supporting documents. You will need to be logged into your USAJOBS account or you may need to create a new account.
- You will be taken to an online application. Complete the online application, verify the required documentation, and submit the application.
- You will receive an email notification when your application has been received for the announcement.
- To verify the status of your application, log into your USAJOBS account, https://my.usajobs.gov/Account/Login, select the Application Status link and then select the More Information link for this position. The Application Status page will display the status of your application, the documentation received and processed, and your responses submitted to the online application. Your uploaded documents may take several hours to clear the virus scan process.
Agency contact information
DLA Land and Maritime POC
- Address
-
DLA Land and Maritime
3990 East Broad Street
Columbus, OH 43218
US
Next steps
Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualifications requirements, and you will receive a notification. A review may be completed of your online questionnaire and the documentation you submitted to support your responses. Applicants that are found qualified may be referred to the hiring official for consideration, and you will receive a notification of referral. The selecting official may choose to conduct interviews, and as part of the selection process, applicants may be required to complete additional supplemental documents. Once the selection is made, you will receive a notification of the decision. If interviews are conducted, DLA uses a technique called Behavior Based Interviewing (BBI). Be sure to check your USA Jobs account for your notification updates.
Fair and Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Help
Required Documents
To apply for this position you must provide a complete Application Package. Each Application Package MUST include:
- Your Resume listing work schedule, hours worked per week, dates of employment and duties performed. If multiple resumes are submitted by an applicant, only the last resume submitted will be reviewed for the qualifications and referred for selection consideration if eligible. IMPORTANT NOTE: Ensure that your resume does not contain any specialized characters, fonts, typefaces or formatting (e.g. tables, macros, etc.). It is also recommended that you convert/save your resume as a PDF prior to attaching to your application.
- Applicable documents to support the eligibility(s) for which you are applying. Please review the following link for a listing of the additional documents you will need to provide: Supporting Documents.
If you are relying on your education to meet qualification requirements:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Help
Learn more about this agency
How to Apply
This job will close when the agency has received 100 applications, which may be sooner than the closing date
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below.
The complete application package must be submitted by 11:59 PM (EST) on the closing date to receive consideration.
- To begin, click Apply Online to access an online application. Follow the prompts to select your USAJOBS resume and/or other supporting documents. You will need to be logged into your USAJOBS account or you may need to create a new account.
- You will be taken to an online application. Complete the online application, verify the required documentation, and submit the application.
- You will receive an email notification when your application has been received for the announcement.
- To verify the status of your application, log into your USAJOBS account, https://my.usajobs.gov/Account/Login, select the Application Status link and then select the More Information link for this position. The Application Status page will display the status of your application, the documentation received and processed, and your responses submitted to the online application. Your uploaded documents may take several hours to clear the virus scan process.
Agency contact information
DLA Land and Maritime POC
- Address
-
DLA Land and Maritime
3990 East Broad Street
Columbus, OH 43218
US
Next steps
Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualifications requirements, and you will receive a notification. A review may be completed of your online questionnaire and the documentation you submitted to support your responses. Applicants that are found qualified may be referred to the hiring official for consideration, and you will receive a notification of referral. The selecting official may choose to conduct interviews, and as part of the selection process, applicants may be required to complete additional supplemental documents. Once the selection is made, you will receive a notification of the decision. If interviews are conducted, DLA uses a technique called Behavior Based Interviewing (BBI). Be sure to check your USA Jobs account for your notification updates.
Fair & Transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Beginning of a dialog window for the agency announcing this job. It begins with a heading 2 called "Learn more about Field Operating Offices of the Office of the Secretary of the Army". Escape will cancel and close the window.
Learn more about
Defense Logistics Agency
America's Combat Logistics Support Agency: The Defense Logistics Agency (DLA) is a U.S. Department of Defense (DoD) agency. DLA provides worldwide logistics support for the missions of the Military Departments and the Unified Combatant Commands under conditions of peace and war. It also provides logistics support to other DoD Components and certain Federal agencies, foreign governments, international organizations, and others as authorized.
Agency contact information
DLA Land and Maritime POC
- Address
-
DLA Land and Maritime
3990 East Broad Street
Columbus, OH 43218
US