This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/729273900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Serves as a Civil Engineer and project manager for the Office of Airports (ARP), New York Airports District Office in the Eastern Region, in support of the Airport Improvement Program (AIP). Serves as the principal Federal Aviation Administration (FAA) organization responsible for all airport program matters in airport design, construction, maintenance, operations and safety.
Learn more about this agency06/02/2023 to 06/22/2023
$67,771 - $151,782 per year
The salary range cited above includes a locality rate of 36.16%.
FV G - I
1 vacancy in the following location:
Yes—as determined by the agency policy.
Occasional travel - The job may require travel from time-to-time, but not on a regular basis. The travel may be for training or other work-related duties.
No
Permanent
Full-time
Excepted
I
No
No
AEA-ARP-23-JAD-84823
729273900
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations.
Also open to those eligible for 30% or More Disabled.
FV-G Duties: Coordinates with senior engineer or supervisor on all aspects of the Airport Improvement Program (AIP) grants-in-aid program regarding the Airports Capital Improvement Plan (ACIP) and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP). Reviews engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Attends pre-design, preconstruction and construction meetings to obtain data for senior level engineer or supervisor to ensure conformance with FAA approved project documents.
Reviews data from field inspections, status reports, and project closeout reports. Coordinates findings with senior engineer/supervisor to ensure projects meet technical compliance and alignment with requirements. Coordinates with other within the organizational unit to share information and discuss status of projects. Reviews professional services contracts, including change orders and supplemental agreements to determine eligibility of work. Prepares and submits final review determinations to senior engineer or supervisor for their approval. Visits airports and current and proposed construction sites to observe construction progress and construction inspections.
FV-H Duties: Reviews, evaluates and makes recommendations on all aspects of the Airport Improvement Program (AIP) grants-in-aid program regarding the Airports Capital Improvement Plan (ACIP) and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP). Reviews and comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Attends pre-design, preconstruction and construction meetings. Collaborates with senior engineer or supervisor to ensure development projects meet FAA regulations, standards, and guidance.
Reviews data from field inspections, status reports, and project closeout reports. Coordinates findings with senior engineer/supervisor to ensure projects meet technical compliance and alignment with requirements. Visits airports and current and proposed construction sites to observe construction progress and perform construction inspections. Provides results to senior engineer or supervisor to ensure acceptable levels of safety are provided. Serves as point of contact with internal FAA stakeholders to coordinate assigned AIP development projects. With support of senior engineer or supervisor, contacts local, state, and federal officials in the coordination, evaluation, and approval of federal grants for airports.
FV-I Duties: Reviews and comments on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Conducts field inspections and reviews status reports/project closeout reports to ensure technical compliance and alignment with project requirements; identifies areas of noncompliance and provides resolution to complex problems/issues. Participates in pre-design, preconstruction and construction meetings to ensure conformance with FAA approved project documents. Ensure development projects meet FAA regulations, standards, and guidance. Develops presentation for conveying technical information.
Performs multiple, varying, and complex assignments to ensure timeliness and technical compliance. Defines, plans, and organizes assigned resources to accomplish organizational objective. Visits airports and current and proposed construction sites to observe construction progress and perform construction inspections to ensure acceptable levels of safety are provided. Reviews, evaluates and makes recommendations on all aspects of the AIP, grants-in-aid program regarding the ACIP and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP).
The FV-G level Engineer is entry level, specialized experience is not applicable. See applicable OPM Qualification Standard: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=GS-PROF.
To qualify for this position at the FV-H level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-G, FG/GS-5/7/9. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position and that is typically in or related to work of the position to be filled. Examples of specialized experience for this position include: 1) Experience reviewing and commenting on project engineering design drawings and specifications, including construction safety phasing plans. 2) Experience reviewing and commenting on contracts, change orders, and/or supplemental agreements. 3) Experience gathering and analyzing data from a variety of sources and presenting findings via report or formal briefing.
To qualify for this position at the FV-I level, you must demonstrate in your application that you possess at least one year of specialized experience equivalent to FV-H, FG/GS-11/12. Specialized experience is experience that has equipped you with the particular knowledge, skills, and abilities to successfully perform the duties of the position and that is typically in or related to work of the position to be filled. Examples of specialized experience for this position include: 1) Experience reviewing and commenting on airport project engineering design drawings and specifications, including construction safety phasing plans. 2) Experience in identifying and resolving complex airport engineering problems/issues. 3) Experience in making recommendations on airport improvements. 4) Experience conveying technical airport engineering information to a variety of audiences.
As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.
In lieu of providing a KSA narrative response in the text box listed below each KSA , in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.
Eligible applicants meeting the minimum qualification requirements and selective factor(s) if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.
In addition to the minimum qualifications, the following has been determined to be a selective factor for this position. This means possession of this criterion is part of the minimum qualifications and is essential to perform the duties and responsibilities of this position. Applicants who do not possess this criterion are ineligible for further consideration.
In addition to meeting the specialized experience above, to qualify for this position you must also meet one of the educational requirements listed below:
Basic Requirements for a Civil Engineer, FV-0810:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics; OR,
B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.
This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
We may use this vacancy to fill other similar vacant positions.
Position may be subject to a background investigation.
A one-year probationary period may be required.
The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies. www.faa.gov/jobs/working_here/financial_disclosure_requirements
The U.S. Department of Transportation strives to ensure that equity, transparency, accountability, collaboration, and communication permeate all that we do for the betterment of the Department, the traveling public, and our nation. As such, DOT values a highly diverse workforce of persons who promote a culture of belonging by respecting the personal dignity and worth of each individual and fostering a positive environment where all feel safe and welcome. If these commitments coincide with your personal ideals and professional aspirations, please consider joining the DOT family.
Leave Enhancement: FAA organizations may offer enhanced annual leave accrual to newly appointed or reappointed employees. In order to receive consideration for such a benefit, applicants' prior non-Federal service or active duty uniformed service must directly relate to the duties of the position to which appointed. Granting enhanced annual leave is at the sole discretion of the hiring organization, and granting such benefit is not an entitlement nor guaranteed to any newly hired employee.
Note: This position is being announced as an FV-0020-G/H/I. If position is filled at the FV-G level incumbent may be promoted to the FV-H and FV-I levels without further competition. However, the grade of a position is based on the duties officially assigned and actually performed by the incumbent of the position. These duties are affected by the Supervisor's willingness to delegate higher graded duties and incumbent's capacity to perform the duties. Therefore, the indication of maximum grade is to be considered neither guarantee nor a commitment that the position will so develop.
If the Agency decides to interview any qualified employee on the selection list, then all on the list who are qualified must be interviewed. If the selection list is shortened to a best qualified list through a comparative process, then the best qualified list shall be considered to be the selection list. If it is determined that interviews are required and telephone interviews are not utilized, travel expenses incidental to these interviews will be paid in accordance with the Agency’s travel regulations and this Agreement.
This position is covered by the FAA Core Compensation plan. Additional information about core compensation is available at http://jobs.faa.gov/FAACoreCompensation.htm
Please ensure you answer all questions and follow all instructions carefully. Errors or omissions may impact your rating or may result in you not being considered for the job.
Applicants may be asked to verify information on your application for employment with the FAA.
Applicants should include examples of their specialized experience in their work history.
Qualifications must be met by the closing date of the vacancy announcement.
You will be evaluated for this job based on how well you meet the qualifications above.
IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.
Applicants must apply on-line to receive consideration for this vacancy announcement. Faxed, mailed or e-mailed applications cannot be accepted.
If you are requesting consideration for any of the special hiring authorities, you must submit the following documentation:
30% or More Disabled Veteran Program: You must submit a DD 214, Certificate of Discharge (Member 4 copy is preferred), and supporting documentation as required by form SF-15 such as an official statement, dated 1991 or later, from the Department of Veterans Affairs or from branch of the Armed Forces certifying to the present existence of the veteran's service-connected disability.
Persons with Disabilities and Persons with Targeted Disabilities Appointment: You must provide proof of disability documentation (i.e. Schedule A Letter) that: May be a letter or other documentation on official stationery/letterhead with an official signature. Clearly states that you are eligible for appointment under the PWD/PWTD hiring authority or a Schedule A appointment authority as outlined in 5 CFR Section 213.3102(u). Does not need to detail the specific disability, medical history, or need for accommodation.
All Veterans: If you are claiming veterans' preference, you must submit either a DD Form 214 Certificate of Release or Discharge from Active Duty (Member 4 Copy or equivalent), or a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions. If you are claiming 10 point preference, you must also submit a completed SF-15, Application for 10-Point Veteran's Preference, and supporting documents outlined on the SF-15. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran.
If you are claiming 10 point preference but fail to submit the supporting documents outlined on the SF-15, you will be tentatively assessed as a 5 point preference eligible provided your DD Form 214 reflects that you have the service required to qualify for preference. Documents must be uploaded or faxed to the Servicing Human Resource Management Office listed in this announcement and all documents must be received by the closing date of the announcement. If you fail to submit documentation, you will be assessed as a non-veteran.
Veterans currently on active duty claiming veterans' preference: You will be granted tentative preference if you submit a document from the armed forces certifying that within 120 days you are expected to be discharged or released from active duty service under honorable conditions and your application shows that you have the required service. Prior to being appointed, you must provide to the Servicing Human Resource Management Office a DD Form 214 documenting discharge/release and showing that the service was honorable or general. If you are on terminal leave, you must provide documentation certifying authorized terminal leave.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You must apply online to receive consideration. Your application must be submitted by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must be submitted at the time a referral list is created in order to receive consideration for positions associated with a register.
IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.
We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.
Please ensure EACH work history includes ALL of the following information:
Once we receive your complete application, the Human Resources Office will conduct an evaluation of your qualifications. Eligible and qualified candidates will be referred to the hiring manager for consideration. You will be contacted directly if selected for an interview.
For instructions on how to check the status of your application, please go to: USAJOBS Help Guide.
Important - If you make any changes to your application, you must resubmit it. If you make changes to your application and do not resubmit it, your changes will not be considered part of your application package, and only your previously submitted application will be evaluated.
All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors. DOT provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager. An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis. Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/729273900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
Thanks to the work of the Federal Aviation Administration (FAA), over the past 60 years, aviation has become central to the way we live and do business, linking people from coast to coast and connecting America to the world. In fact, FAA has created the safest, most reliable, most efficient, and most productive air transportation system in the world. The FAA operates from locations across the U.S. and around the world. The agency is headquartered in Washington, D.C. and maintains nine regional offices, Air Route Traffic Control Centers and Terminal Radar Approach Control Facilities across the nation, and other key facilities. In addition, the FAA maintains a presence in every major and regional airport in the United States and has several international offices around the globe.