An official website of the United States government
This position serves as a Civil Engineer for the Office of Airports (ARP), Atlanta Airports District Office (ADO) in the Southern Region, in support of the Airport Improvement Program (AIP). The Atlanta ADO serves as the principal Federal Aviation Administration (FAA) organization responsible for all airport program matters in airport design, construction, maintenance, operations and safety.
Learn more about this agency02/20/2020 to 03/16/2020
$81,769 - $126,730 per year
Salary Range above includes locality pay of 22.16%.
FV I
1 vacancy in the following location:
Yes—as determined by the agency policy.
Occasional travel - The job may require travel from time- to-time, but not on a regular basis. The travel may be for training or other work-related duties.
No
Permanent
Full-Time
Excepted
NA
No
No
ASO-ARP-20-A123-66139
560346700
Current or former competitive service federal employees.
Current excepted service federal employees.
Also open to former permanent excepted service federal employees eligible under an interchange agreement. Current or former permanent federal employees must have met a one year probationary period or trial period in the competitive or excepted service. Applications will also be accepted from preference eligibles and veterans who are honorably discharged from the Armed Forces after completing at least 3 years of continuous active duty service.
Review and comment on engineering design drawings, specifications, construction safety, and phasing plans for compliance with established requirements. Conduct field inspections and review status reports/project closeout reports to ensure technical compliance and alignment with project requirements; identify areas of non-compliance and provide resolution to complex problems/issues. Participate in pre-design, preconstruction and construction meetings to ensure conformance with FAA approved project documents. Ensure development projects meet FAA regulations, standards, and guidance. Develop presentation for conveying technical information. Perform multiple, varying, and complex assignments to ensure timeliness and technical compliance. Define, plan, and organize assigned resources to accomplish organizational objectives. Visit airports and current and proposed construction sites to observe construction progress and perform construction inspections to ensure acceptable levels of safety are provided. Review, evaluate and make recommendations on all aspects of the Airport Improvement Program (AIP) grants-in-aid program regarding the Airports Capital Improvement Plan (ACIP) and/or Passenger Facility Charge (PFC) funding eligibility, justification, and conformance with the approved Airport Layout Plan (ALP). Review professional services contracts, including change orders and supplemental agreements to determine eligibility of work. Serve as the primary contact with local, state, and federal officials in the coordination, evaluation, and approval of federal grants for airports. Collaborate with pubic airport investment of federal funds. Negotiate with non-agency officials to resolve areas of conflict. Review and make recommendations to ADO Management and Airports Regional office regarding requests for Modification of Standards (MOS) for design and construction documents. Participate in runway safety meetings and make recommendations to management regarding funding allocations for any recommended runway safety projects. Review and process aeronautical studies. Coordinate with other FAA divisions regarding reimbursable agreements and projects that may affect an FAA facility or operation. Prepares correspondence for review by management including Congressional responses, briefing papers, approval letters, and guidance to sponsors associated with all aspects of airport development. Performs other duties as assigned.
In addition to the basic requirement listed below in the EDUCATION section, to qualify for this position, applicants must meet the specialized experience required for the position. You must demonstrate in your application that you possess at least one year of specialized experience equivalent to the FV-H, FG/GS-10-12. Specialized experience may include but not limited to: Experience reviewing and commenting on airport project engineering design drawings and specifications, including construction safety phasing plans; experience in identifying and resolving complex airport engineering problems/issues; experience in making recommendations on airport improvements; and experience conveying technical airport engineering information to a variety of audiences.
Qualification requirements must be met by the closing date of this vacancy announcement.
Eligible applicants meeting the minimum qualification requirements and selective factor(s), if applicable, may be further evaluated on the Knowledge, Skills and Abilities (KSA) listed in the announcement. Based on this evaluation, applicants will be placed in one of the following categories: score order, category grouping, or alphabetical and referred to the selecting official for consideration.
As a part of the Federal-Wide Hiring Reform Initiative (streamlining the hiring process), the FAA is committed to eliminating the use of the Knowledge, Skills and Ability (KSA) narratives from the initial application in the hiring process for all announcements. Therefore, as an applicant for this announcement, you are NOT required to provide a narrative response in the text box listed below each KSA.
In lieu of providing a KSA narrative response in the text box listed below each KSA, in your work history, please include information that provides specific examples of how you meet the response level or answer you chose for each KSA. Your work history examples should be specific and clearly reflect the highest level of ability. Your KSA answers will be evaluated further to validate whether the level that you selected is appropriate based on the work history and experience you provided. Your answers may be adjusted by a Human Resource Specialist as appropriate.
This position has a positive education requirement: Applicants must submit a copy of their college or university transcripts(s) and certificates by the closing date of announcement to verify qualifications. If selected, an official transcript will be required prior to appointment. You may upload these documents with your application in USAJOBS or fax it to fax number provided in the announcement (please include announcement number on each page).
Failure to do so will result in loss of consideration.
Schools must be accredited by an accrediting institution recognized by the U.S. Department of Education. Accreditation may be verified at the following website: www.ed.gov/admins/finaid/accred/index.html.
Foreign education must be evaluated by a private professional organization specializing in interpretation of foreign education credentials or an accredited U.S. educational institution in terms of equivalence to a degree acquired at an American college or university. A copy of the evaluation results must be included, otherwise your foreign education will not be considered.
To qualify for this position you must also have a degree in professional engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Qualifications must be met by the closing date of this vacancy announcement.
Make sure your resume includes detailed information to support your qualifications and answers to the job questionnaire.
We may use this vacancy to fill other similar vacant positions.
Position may be subject to a background investigation.
A one-year probationary period may be required.
The person selected for this position may be required to file a financial disclosure statement within 30 days of entry on duty. FAA policy limits certain outside employment and financial investments in aviation-related companies.
FAA's CORE COMPENSATION PLAN:
This position is covered by the FAA Core Compensation plan. Additional information about core compensation is available at http://jobs.faa.gov/FAACoreCompensation.htm
If the Agency decides to interview any qualified employee on the selection list, then all on the list who are qualified must be interviewed.
You will be evaluated for this job based on how well you meet the qualifications above.
IMPORTANT: Applicants may be rated on the extent and quality of experience, education, and training relevant to the duties of the position(s). All answers provided in the on-line process must be substantiated. Ensure that your application package/resume supports your responses.
You will be required to provide proof of U.S. Citizenship.
Applicants claiming eligibility for the Expanded Veterans Hiring Opportunity (EVHO), MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
This position has a positive education requirement; college transcripts are required for ALL candidates newly appointed to the FAA in the 0800 (Engineering) series.
College transcripts must be submitted from current FAA employees applying for internal vacancies if they have never held a position in the 0800 (Engineering) series with the FAA.
College transcripts are not required from current FAA employees who are currently occupying an 0800 (Engineering) series.
If selected, official transcripts are required prior to employment.
If you are a current or former Federal employee (including a current FAA employee), you MUST provide a copy of your SF-50 (Notification of Personnel Action) containing information in Blocks 15, 17, 18, 19, 22, and 24 so it can be used to verify your position title, series, grade, tenure, and organization of record by the closing date of the announcement. You may fax your SF-50 or upload it into the on-line application. If faxing the SF-50, please ensure you include the vacancy announcement number on the faxed copy.
If you are a current Federal employee and need a current copy of your SF-50, please contact your personnel office. If you are an FAA employee, you can access and print your SF-50 from the eOPF system https://eopf.opm.gov/dot/. If you are a former Federal employee, you can obtain a copy of your SF-50 by writing the National Personnel Records Center Annex, 1411 Boulder Boulevard, Valmeyer, IL 62295. Additional information is available from this link: http://www.archives.gov/st-louis/civilian-personnel/.
Expanded Veterans Hiring Opportunity (EVHO) are those veterans who are honorably discharged from the Armed Forces after completing at least three (3) years of continuous active service. Applicants claiming eligibility for EVHO, MUST submit a DD Form 214 reflecting character of service to verify eligibility by the closing date of the announcement as requested by the Human Resource Office. Eligibility for EVHO will be considered based on applicable documentation submitted by the closing date.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
You must apply online to receive consideration. Your application must have a status of "Received" by 11:59 PM Eastern Time on the Close Date for it to be accepted. If you are applying for positions associated with FAA registers, your application must have a status of "Received" each time a referral list is created in order to receive consideration for positions associated with register.
IN DESCRIBING YOUR WORK EXPERIENCE AND/OR EDUCATION, PLEASE BE CLEAR AND SPECIFIC REGARDING YOUR EXPERIENCE OR EDUCATION.
We strongly encourage applicants to utilize the USAJOBS resume builder in the creation of resumes.
Please ensure EACH work history includes ALL of the following information:
Candidates for FAA positions are evaluated using our Automated Vacancy Information Access Tool for Online Referral (AVIATOR) system.
AVIATOR compares your skills and experience as described in your application with the requirements of the position.
If you are found to be an eligible, highly-qualified candidate, you will be referred to the selecting official for further consideration.
(In some cases, individuals with priority for special consideration must be considered and selected before other candidates.)
Whether or not you are contacted for an interview depends upon the location of the position and the judgment of the selecting official.
Important - If you make any change to your application, you must resubmit it.
If you change your application and do not resubmit it, your changes will not be considered part of your application package, and your previous application will be considered.
All qualified applicants will be considered regardless of political affiliation, race, color, religion, national origin, gender, sexual orientation, marital status, age, disability, or other non-merit factors. DOT provides reasonable accommodations to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency contact listed in the Agency Contact Information section of this announcement or the hiring manager. An employee with a disability must notify the decision-maker of the accommodation request. Job applicants and employees are required to follow up oral requests in writing. Decisions on granting reasonable accommodation will be made on a case-by-case basis. Additional information on reasonable accommodations procedures or on EEO Programs is available on Office of Civil Rights (ACR) or by contacting the local FAA Civil Rights Office.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/560346700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
Thanks to the work of the Federal Aviation Administration (FAA), over the past 50 years, aviation has become central to the way we live and do business, linking people from coast to coast and connecting America to the world. In fact, FAA has created the safest, most reliable, most efficient, and most productive air transportation system in the world.
