An official website of the United States government
This position is located in either the Technical Division Group or a local field office within the Inspection Division of a coal District, performing a variety of duties to promote and enforce mine safety and Health compliance with the coal mining industry.
There is 1 position to be filled with either a Mining Engineer or a Mine Safety and Occupational Health Specialist and will be located in either Denver, CO, Delta, CO, Farmington, NM, Gillette, WY. US.
Learn more about this agency11/28/2019 to 12/12/2019
$62,236 - $105,890 per year
GS 11 - 12
Yes—as determined by the agency policy.
50% or less - For mine inspections or training.
No
Permanent
Full-time - Full Time
Competitive
12
No
Yes
MS-20-DAL-MSHA-028
552940600
Current or former competitive service federal employees.
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations.
Certain current or former term or temporary federal employees of a land or base management agency.
Current/former Fed. employees w/ competitive/reinstatement eligibility; ICTAP/CTAP eligibles in local commuting area; Veterans' Employment Opportunity Act eligibles; persons eligible for these non-competitive authorities: 30% or > compensably disabled veterans; persons w/disabilities; present/former Peace Corps (PC) personnel & former PC volunteers, and Military Spouses
For GS-11: Conducts studies in mines related to health and safety to determine existing or potential hazard. Conducts health and safety inspections of all types of coal mines and related facilities. Conducts investigation of fatal and serious nonfatal accidents. Directs and conducts emergency services. Directs or participates in safety meetings, programs, and training course. Maintains and inspects safety equipment.
For GS-12: Conducts engineering studies related to health and safety in difficult and complex coal mines to determine existing or potential hazards. Conducts surveys in mines, plants, and other industrial operations to evaluate environmental health hazards. Conducts safety and health inspections of the most difficult and complex underground and surface coal mines. Always on call to respond to emergencies at mine sites. Directs and conducts emergency services. Serves as a specialist and authoritative source of information on coal mine safety and inspection, methods, procedures and techniques.
Applicants must meet time-in-grade, time-after-competitive-appointment and qualifications requirements within 30 calendar days after the closing date of the vacancy to be eligible for consideration for selection.
Federal Employees Please Note: Your SF-50 must include enough information to be able to determine that time-in-grade requirements have been met and reflects your position title, pay plan/series/grade, tenure and the type of appointment (i.e. competitive/excepted). In some cases you may need to submit more than one SF-50.
Reference the "Required Documents" section for additional requirements.
BASIC REQUIREMENTS:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-yearphysics and chemistry) in five of the following seven areas of engineering science or
physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as
described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not allinclusive.)
AND
Applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-09 for the GS-11, GS-11 for the GS-12, in the Federal Service.
Creditable specialized experience for the GS-11: Reviewed and recommended the approval or disapproval of ventilation plans for underground mines. Conducted on-site investigations; Participated as a ventilation expert on teams conducting various studies and prepared technical reports and/or citations on inspections and investigations relating to engineering concepts and methodologies.
Creditable specialized experience for the GS-12: Conducted difficult and complex mine studies or investigations and prepared comprehensive reports with recommendations. Provided guidance to other engineers and inspectors. Offered testimony at hearings or court proceedings. Trained and reviewed other engineers or inspectors.
Your resume must clearly describe your relevant experience or you will be disqualified for lacking the specialized experience requirement.
For the GS-11: Three years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree
For the GS-12: There is no substitution of education for the required specialized experience.
If you do not submit sufficient academic documentation necessary to demonstrate that you meet the eligibility and minimum qualification requirements described in this announcement, your application will be deemed incomplete and you will be ineligible for further consideration for this vacancy.
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum course work requirements for this position. Click Evaluation of Foreign Education for more information.
DOL seeks to attract and retain a high performing and diverse workforce in which employees’ differences are respected and valued to better meet the varying needs of the diverse customers we serve. DOL fosters a diverse and inclusive work environment that promotes collaboration, flexibility and fairness so that all individuals are able to participate and contribute to their full potential.
Federal Employees Please Note: Your SF-50 must include enough information to be able to determine that time-in-grade requirements have been met and reflects your position title, pay plan/series/grade, tenure and the type of appointment (i.e. competitive/excepted). In some cases you may need to submit more than one SF-50.
All MSHA employees and their spouses, and minor children are prohibited by regulation from having any interest, direct or indirect, in any mine or mining company which may be directly affected by the work of MSHA through its investigations, technical research, or other activities. These interests are prohibited under the Department of Labor's Supplemental Standards of Ethical Conduct Regulations at 5 CFR 5201.105. Certain MSHA employees are required to file a financial disclosure report. For questions, please contact the vacancy contact on this announcement.
You will be evaluated for this job based on how well you meet the qualifications above.
Click here for Evaluation details. For Displaced Employees ONLY: if you meet the eligibility requirements for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration for special priority selection. ICTAP/CTAP eligibles will be considered "well-qualified" if they attain at least a rating score of 85 in a numerical rating scheme. Be sure to review DOL Account Eligibility Questions #24 and 27 to reflect that you are applying as an ICTAP/CTAP eligible and submit supporting documentation.
Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:
The information you provide may be verified by a review of your work experience and/or education, by checking references and through other means (ex. interview). Your evaluation may also include a review by an HR Specialist or panel and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc). The examining Human Resources Office (HRO) makes the final determination concerning applicant ratings. Your resume MUST provide sufficient information to substantiate your vacancy question responses. If not, the HRO may amend your responses to more accurately reflect the level of competency indicated by the content of your resume.
Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:
Oral and Written Communication: A high degree of skill in effective written, oral, and other forms of communication.
Manages and Organizes Information: Ability to analyze and resolve the most complex and critical problems occurring at many coal mines, each of which may be individual and unique. Ability to devise new procedures to collect and evaluate data regarding ventilation methods and equipment.
Mine Safety & Health: A thorough knowledge of the Federal mine Safety & Health Act of 1977. A broad knowledge of the processes, methods and equipment utilize to mine coal. Professional knowledge of engineering principles and practices applicable to the full range of engineering duties concerned with ventilation systems, methods, and equipment, including the latest and most unusual methods and equipment, as gained through education or experience. Knowledge of the impact of various processes, methods and equipment, and environmental, engineering and production factors involved in mining on ventilation.
Interpersonal Skills: Ability to show understanding, friendliness, courtesy, tact, empathy, cooperation, concern, and politeness to others; relates well to different people from varied backgrounds and different situations; is sensitive to cultural diversity, race, gender, disabilities, and other individuals.
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date. Warning: If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission. Also, do not upload password protected documents.
The following documents are required from all applicants (PLEASE READ CAREFULLY):
ARE YOU A CURRENT OR FORMER FEDERAL EMPLOYEE? If applying as a status candidate with current or former Federal Service, please provide a copy of your last or most recent SF-50, "Notification of Personnel Action” which shows your appointment eligibility for the position for which you are applying. Your SF-50 must identify the highest grade you held on a permanent basis, Pay Plan/Pay Schedule, Series, and Grade/Pay Band, and career status. Multiple SF-50 may be submitted to demonstrate your highest previous rate and eligibility.
*WARNING: An award SF-50 (ex. cash or time off award) may not indicate grade, step and competitive status. For current DOL employees, an award SF-50 DOES NOT indicate grade and step.
- Most recent performance appraisal/evaluation signed and dated within 18 months is requested by the agency, but will not disqualify candidates if not submitted. If not submitted during the application process, one may/will be requested at the time of the interview if the opportunity is extended. Applies to current and former Federal employees.
- Land Management Eligibles: a copy of your most recent Notification of Personnel Action (SF-50 or equivalent) proving your eligibility for appointment under the Land Management Workforce Flexibility Act. This service must have been performed in the competitive service, under a time limited appointment in a Land Management Agency, as defined by P.L. 114-328. For more information, click here.
The following documents are required if applicable:
- Displaced Employee Placement Documents - Only required if requesting priority consideration under ICTAP/CTAP Eligibility.
- DD-214 - verifying military service, eligibility for consideration under the Veterans Employment Opportunity Act (VEOA) and showing character of discharge (ex. Member Copy 4 and 2 are acceptable vs. Copy 1 which is not acceptable to adjudicate veteran's preference)
- Special/Non-Competitive Appointing Authority Documents - Applicants who are eligible for consideration, and wish to be considered, under one of the following non-competitive hiring authorities must submit appropriate documentation (click on the links below to see the documentation requirements):
(a) Veterans' Recruitment Appointment (VRA)
(b) Persons with Severe Disabilities (SCHEDULE A)
(c) 30% or More Compensably Disabled Veterans (DAV)
(d) Former Peace Corps Volunteers (PCV) OR Current or Former Peace Corps Employees (PCE)
(e) Military Spouses (MISP)
(f) Other
- Cover Letters are not mandatory and will not be used to verify experience, but may be submitted
Applicants selected for employment who are not current DOL employees will be required to provide proof of citizenship, and the E-Verify system will be used to confirm the employment eligibility of all new hires.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the initial online application, to include submission of the required documentation specified in the Required Documents section.
Follow the steps below to apply. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time (ET) on the vacancy closing date to receive consideration. Paper applications and supplemental documents submitted in any other manner without prior approval from the vacancy contact will not be considered. Click here for information on Reasonable Accommodations.
SAVE your information before the 30 MINUTE TIMEOUT! For help, go to https://www.usajobs.gov/Help/how-to/.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents
Your resume must provide sufficient information to substantiate your responses in the self-assessment vacancy questions. If not, HR may amend your responses to more accurately reflect the competency indicated by resume content. FOR EACH EMPLOYMENT PERIOD, include: start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week); otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS)
Once you have identified a job on www.usajobs.gov that you wish to apply for, click on the title and click the Apply button . For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Click “Start Application” and proceed through 5 steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. At Step 5, click “Continue to Agency Site”.
STEP 3 – Complete the 2nd part of the application process (DOL)
On the Department of Labor (DOL) page, create a DOL Account if you have not already and click “APPLY TO THIS VACANCY”. Continue through the 7 progress steps indicated by circles at the top of the DOL page. The 3rd progress step is where you answer the vacancy specific questions. The 4th progress step "Documents" is where you submit required documents (only if applicable to you) specified in the "Required Documents" section of this vacancy. If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission.
STEP 4 – On the “Review and Submit” step, click “Submit Application”
The last “Confirmation” step will turn green noting that your application was submitted successfully.
STEP 5 - Edit Application as needed by 11:59 pm ET of Closing Date by returning to USAJOBS, clicking the vacancy, then “Update Application”.
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interview. You will be notified of the outcome. A selection is expected to be made within 30 calendar days from the issuance date of the certificate.
For instructions on how to check the status of your application, go to Step 7 on: Using DOORS and USAJOBS Help Guide. To sign up for Application Status Updates via email: Click Here for instructions.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/552940600. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
