This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810335300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a ELECTRONICS MECHANIC (T32), Position Description Number D1204000and is part of the AL FMS 28, National Guard.
ORGANIZATION: FMS 28, MOBILE, AL
SELECTING OFFICIAL: CW5 K. TRAWICK
***THIS POSITION MAY BE AUTHORIZED A RECRUITMENT OR RELOCATION INCENTIVE FOR UP TO 25% ALL INCENTIVES MUST BE APPROVED PRIOR TO THE NEW EMPLOYEE IN PROCESSING.***
09/19/2024 to 10/19/2024
$32.09 - $37.51 per hour
WG 10
1 vacancy in the following location:
No
No
Not required
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Permanent - NON-MERIT
Full-time
Excepted
10
No
No
AL-12539175-AR-24-259
810335300
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
Current or former competitive service federal employees.
Current excepted service federal employees.
Current members, those who want to join or transitioning military members.
Title 32 CAT 1- All on board Federal Employees/Technicians within the ALARNG (T32 and T5, Permanent and Excepted Indefinite) CAT 2- Current Army M-Day and Temporary Technicians within ALARNG CAT 3- Applicants willing to become NG T32 DS Technicians and gain ALARNG membership, all current federal employees, all U.S. Citizens
(1) Performs troubleshooting and routine repairs on individual components and moderately complex systems of launch pod/containers (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assemblies (M/LPA), trainer missile simulator modules, and various like items. Troubleshoots carrier electrical and power distributions systems components of the weapon system or equipment being repaired. Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement. Performs initial and final checks and may perform inspections when required on equipment being repaired.
(2) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, modules, and interconnecting cables of a variety of combat and tactical, and communication equipment. This equipment has moderate or limited complexity to include multi-channel very high frequency (VHF) or ultra high frequency (UHF) transmitters or receivers, power supplies, and multilayered printed circuit boards. Repairs or replaces chassis mounted components on Unit Under Test (UUT). Performs Automatic Test Equipment (ATE) operations for fault isolation on electronic modules, circuit cards and assemblies, and similar items to component level. Replaces faulty components on UUT printed circuit boards and power distribution systems. Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.
(3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, other moderately complex systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment. Repairs, aligns, and adjusts infrared night vision sights, optical sights, and traversing units. Removes and replaces defective electrical, electronic, and mechanical components. Conducts inspections, diagnoses nature and extent of equipment malfunction. Determines whether equipment may be economically repaired or declared unserviceable. Performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items. Repairs or recommends for salvage defective components or assemblies. Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment. Uses associated field maintenance equipment in analytical maintenance procedures. Installs and applies equipment modifications when directed.
(4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit. Uses special and common hand tools, power tools, and gauges to make intricate repairs.
(5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired. Assists in the preparation of requests for required repair parts.
(6) May conduct or be involved in a Maintenance Assistance and Instruction Team (MAIT) or act as an inspector on a Command Maintenance Evaluation Team (COMET) on electronic, automation, communication, and equipment. Provides technical assistance and instruction to units throughout the state so that they will be able to operate at the desired level of proficiency.
(7) Performs other duties as assigned.
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Army National Guard. Applicants who are not currently a member of the Alabama Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Army National Guard recruiter at 800-464-8273 prior to applying for this position.
MAXIMUM MILITARY RANK: CW4
*Other Requirements: For positions requiring the operation of motor vehicles, candidates must have a valid state driver's license.
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE: Experience or training which demonstrates the applicant's knowledge of electrical or electronic theory, knowledge of common testing procedures, skill in the use of hand tools of the electronics trade, and skill in reading schematics.
SPECIALIZED EXPERIENCE: Experience or training in utilizing principles, basic functions, and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.
SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
To apply for this position, you must submit a complete Application Package which includes:
1. Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2. Other supporting documents: SF-50s and DD 214s are recommended, but not required.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12539175
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/810335300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!