This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/693130900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
This position is with the Sugarbeet and Potato Research Unit in Fargo, ND
Research scientists have open-ended promotion potential. Research accomplishments and their impact on the duties and responsibilities of positions are evaluated periodically. The grade level is limited only by the individual's demonstrated ability to perform research of recognized importance to science and technology. *Final grade level may be determined by a peer review panel.
*Announcement extended to Jan 13, 2023*
12/07/2022 to 01/13/2023
$79,363 - $144,976 per year
GS 12 - 15
No
Yes—as determined by the agency policy.
Occasional travel - You may be expected to travel for this position.
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Permanent
Full-time
Competitive
15
No
No
ARS-D23PA-11750883-KA
693130900
To further support your qualifications, it is strongly recommended that you submit a one-page abstract of your MS thesis and/or Ph.D. dissertation. Failure to do so could result in loss of your consideration/referral. Also, please submit a list of names, addresses, and phone numbers of persons familiar with your stature, contributions, recognition; any honors or awards received; memberships in professional or honor societies; invitations to make presentations at scientific/technical meetings; scientific society office and committee assignments; presentations (other than invitation); and publications.
Applicants must be available to report for duty at the time a selection is made. Selections are typically made within 30 days of the closing date of the announcement.
In addition to meeting the specialized experience as outlined above, applicants must also meet the minimum education requirement for each series and defined below. Minimum qualification requirements are found in the OPM Qualification Standards Operating Manual for General Schedule Positions.
Basic Requirements
Agronomy (0471) - Degree: agronomy; or related discipline of science that included at least 30 semester hours of course work in the basic plant sciences, including at least 15 semester hours in agronomic subjects, such as those dealing with plant breeding, crop production, and soil and crop management OR
Combination of education and experience: at least 30 semester hours in the basic plant sciences, including a minimum of 15 semester hours in agronomic subjects, as shown in A above, plus appropriate experience or additional education.
Graduate Education: Agronomy, or one of the related disciplines or fields of science, such as plant physiology, soils, or genetics, where the curriculum or pattern of training placed major emphasis on field crops or agronomy. Graduate study in related fields, such as botany, plant pathology, and biochemistry may also be qualifying, provided it placed a sufficient amount of emphasis on agronomy.
Evaluation of Education: Course work in such subjects as botany, plant taxonomy, plant physiology, plant breeding or genetics, plant ecology, plant pathology, microbiology, agronomy, or those dealing with basic soil-water-plant relationships of an agronomic or ecologic nature may be used to meet the 30-semester-hour requirement in the basic plant sciences. Agronomy courses include agronomy, fieldcrops, field crop production or management, soil and crop management, plant breeding and development, weed control, and similar courses, including those in soils, biochemistry, plant physiology, etc., provided they dealt with principles, methods, or procedures that are applied directly in agronomic work and in the solving of agronomic problems
Engineering (0890) Degree: Engineering. To be acceptable, the program must:
(1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or
(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE)examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): Visit the OPM website for information on how to apply as a CTAP, RPL, or ICTAP eligible. To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP candidates must be rated and determined to be well qualified (or above) based on an evaluation of the competencies listed in the How You Will Be Evaluated section. When assessed through a score-based category rating method, CTAP/ICTAP applicants must receive a rating of at least 71 out of a possible 100.
Recruitment or Relocation Incentive may be authorized. Final determination to pay an incentive will be made by the hiring official at time of job offer.You will be evaluated for this job based on how well you meet the qualifications above.
You will be evaluated in accordance with the category rating procedure as defined in the USDA Demonstration Project Plan. Applicants who meet the basic minimum qualification requirements established for the position will be placed in the Eligible category. Eligible applicants will be further evaluated against criteria for placement in the Quality category. This evaluation is based on the level of your experience, education, and/or training as determined by your responses to the Assessment Questionnaire. Applicants with veterans' preference are listed ahead of applicants who do not have veterans' preference within each category.
Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.The following documents are required for your applicant package to be complete. Our office cannot be responsible for incompatible software, your system failure, etc. Encrypted documents will not be accepted. Failure to submit required, legible documents may result in loss of consideration.
Please read the entire announcement and all instructions before you begin. You must complete this application process and submit all required documents electronically by 11:59p.m. Eastern Time (ET) on the closing date of this announcement.
Applying online is highly encouraged. We are available to assist you during business hours (normally 8:00a.m. - 4:00p.m., Monday - Friday). If applying online poses a hardship, contact the Agency Contact listed below well before the closing date for an alternate method. All hardship application packages must be complete and submitted no later than noon ET on the closing date of the announcement in order to be entered into the system prior to its closing.
This agency provides reasonable accommodation to applicants with disabilities on a case-by-case basis; contact the Agency Contact to request this.
To begin, click "Apply" and follow the instructions to complete the Assessment Questionnaire and attach your resume and all required documents.
NOTE: Please verify that documents you are uploading from USAJOBs transfer into the Agency's staffing system as there is a limitation to the number of documents that can be transferred. However, once in the Agency's staffing system, you will have the opportunity to upload additional documents. Uploaded resumes must be less than 5MB and in one of the following document formats: GIF, JPG, JPEG, PNG, RTF, PDF, TXT or Word (DOC or DOCX). Do not upload Adobe Portfolio documents because they are not viewable.
Multiple positions may be filled from this announcement.
Your application will be reviewed to verify that you meet the eligibility and qualification requirements for the position prior to issuing referral lists to the selecting official. If further evaluation or interviews are required, you will be contacted. Log in to your USAJOBS account to check your application status.
You must choose to turn on email notifications in your USAJOBS profile if you want to receive important email notifications that may impact your applicant experience (e.g. If you start an application and do not submit it prior to the closing date, USAJOBS will send an email reminder that the closing date is approaching and your application is in an incomplete status).
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/693130900. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
Find Solutions to Agricultural Problems that Affect Americans Every Day, From Field to Table.