Skip to main content
U.S. flag
Back to results

CIVIL ENGINEER

Department of Agriculture
Forest Service
This job announcement has closed

Summary

THIS IS AN OPEN CONTINUOUS ANNOUNCEMENT. This type of announcement provides the Forest Service with a readily available source of applicants when vacancies occur. Eligibility and qualifications will be verified when there is a vacancy for the location and grade for which you applied.

Information on specific locations where jobs are being filled and the dates when applications are due for these locations can be found at https://fsoutreach.gdcii.com/Outreach.

Overview

Help
Hiring complete
Open & closing dates
04/01/2020 to 11/30/2020
Salary
$52,905 to - $64,009 per year

Salary wage as shown is for Rest of the U.S. For more information, refer to the Office of Personnel Management, Salary and Wages web page.

Pay scale & grade
GS 9 - 11
Locations
FEW vacancies in the following locations:
Andalusia, AL
Brent, AL
Double Springs, AL
Heflin, AL
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-Time
Service
Competitive
Promotion potential
11
Job family (Series)
Supervisory status
No
Security clearance
Other
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
20-R8OCR-810-CE-9-11DP
Control number
564083800

Duties

Help
  • The responsibilities listed below are at the full performance level.
  • Develop and modify civil engineering plans and specifications for new construction.
  • Prepare or supervise the preparation of special design specifications, cost estimates, and design packages for engineering contracts.
  • Evaluate design objectives, identify economic and efficient procedures for civil engineering projects.
  • Determine a project's costs, methods, techniques, material, and equipment for effectiveness in reaching the organization?s objectives.
  • Provide technical advice as the contracting officer's representative to ensure contract compliance on projects.
  • Interpret contracts for contractors in order to resolve problems relating to contract plans, specifications, and materials that would not result in changes to schedule or budget.
  • Participate with Contracting Officer in pre-construction meetings to review contracts, discuss any contractual issues and resolve any difficult and complex problems with contractors.
  • Confer with contractor's representatives about construction practices and procedures.
  • Inspect civil engineering projects to ensure safety standards, health and regulatory requirements are followed.

Requirements

Help

Conditions of employment

  • Must be a U.S. Citizen or National.
  • Males born after 12-31-59 must be registered for Selective Service or exempt.
  • Subject to satisfactory adjudication of background investigation and/or fingerprint check.
  • Successful completion of one-year probationary period, unless previously served.
  • Per Public Law 104-134 all Federal employees are required to have federal payments made by direct deposit to their financial institution.
  • Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit E-Verify.

Qualifications

In order to qualify, you must meet the eligibility and qualifications requirements as defined below by the closing date of the announcement. For more information on the qualifications for this position, visit the Office of Personnel Management's General Schedule Qualification Standards.

Your application and resume must clearly show that you possess the experience requirements. Transcripts must be provided for qualifications based on education. Provide course descriptions as necessary.

Basic Requirements for All Professional Engineering Positions, 0800 Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:

  1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
  2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
  3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
  4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
In addition to meeting the basic requirement, you must also possess experience and/or directly related education in the amounts listed below.

Specialized Experience Requirement:
For the GS-09: You must have 2 years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree (coursework directly related to the position being filled); OR successful completion of a 5-year program of study of at least 160 semester hours leading to a bachelor's degree in engineering and 1 year of appropriate professional experience; OR a combination of superior academic achievement and 1 year of appropriate professional experience; OR one year of specialized professional engineering experience equivalent to at least the GS-7 level; OR or an appropriate combination of specialized experience and education (only graduate education in excess of 18 semester hours may be used to qualify applicants for this grade level).Examples of specialized experience for this position are:
  • Assisted in the design and development of routine construction drawings and specifications for projects with straightforward technical characteristics;
  • Assisted with site visits to ensure construction was conducted in accordance with established contract specifications; and/or
  • Assisted in gathering data used to monitor the progress of contractors in achieving contract requirements and project milestones such as performing basic surveys and investigations to establish baseline data used to initiate a requirements review.
For the GS-11: You must have 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree (coursework directly related to position being filled); OR one year of specialized experience equivalent to at least the GS-9 level; OR an appropriate combination of specialized experience and graduate level education (beyond what is required for a master's degree, i.e., more than 36 semester hours leading to a Ph.D.)Examples of specialized experience are:
  • Monitored day-to-day performance of an engineering contract by reviewing drawings for accuracy and adequacy, and evaluated requests for routine design deviations;
  • Prepared civil engineering design criteria for smaller or less complex projects, included portions of structures such as bridges, retained walls, or structural pavement sections;
  • Planned and conducted engineering projects according to clear and specified objectives such as developed technical data on materials, sizes, dimensions, and quantities and costs of materials to be incorporated in formal specifications; and/or
  • Performed routine engineering safety related assessments, such as compliance with existing Federal and State laws, and organization safety regulations.
Professional engineering experience is defined as nonroutine engineering work that required and was characterized by (1) professional knowledge of engineering; (2) professional ability to apply such knowledge to engineering problems; and (3) positive and continuing development of professional knowledge and ability.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Additional information

The primary purpose of this position is performing a variety of duties requiring professional civil engineering expertise.

Information on specific locations where jobs are being filled and the dates when applications are due for these locations can be found at https://fsoutreach.gdcii.com/Outreach.

Career Transition Assistance Plan (CTAP), Reemployment Priority List (RPL), or Interagency Career Transition Assistance Plan (ICTAP): Visit the OPM website for information on how to apply as a CTAP, RPL, or ICTAP eligible. To exercise selection priority for this vacancy, CTAP/RPL/ICTAP candidates must meet the basic eligibility requirements and all selective factors. CTAP/ICTAP candidates must be rated and determined to be well qualified (or above) based on an evaluation of the competencies listed in the How You Will Be Evaluated section. When assessed through a score-based category rating method, CTAP/ICTAP applicants must receive a rating of at least 85 out of a possible 100.

Veterans who are preference eligible or who have been separated from the armed forces under honorable conditions after three years or more of continuous active service are eligible for consideration under the Veteran's Employment Opportunity Act (VEOA).

If you are selected for a position with further promotion potential, you will be placed under a career development plan, and may be non-competitively promoted if you successfully complete the requirements and if recommended by management. However, promotion is not guaranteed.

This position is being concurrently announced under Merit Promotion Announcement Number 20-R8OCR-0810-CE-9-11G Current or former Federal employees or other eligible applicants may apply to both announcements to expand all possibilities of consideration since different referral criteria apply to each type of announcement. See the above announcement for more information.

The USDA Forest Service has legislative authority to recruit and fill Permanent (Career/Career-Conditional), Temporary, and Term Appointments under the USDA Demonstration Project. Under this authority, any U.S. citizen may apply.

Information on special hiring authorities may be found on the USAJOBS website.

This position may be eligible for telework and other flexible work arrangements.

We may select from this announcement or any other source to fill one or more vacancies.

Government housing may be available.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated for this job based on how well you meet the qualifications.

You will be evaluated in accordance with the category rating procedure as defined in the USDA Demonstration Project Plan. Applicants who meet the basic minimum qualification requirements established for the position will be placed in the Eligible category. You will be further evaluated against criteria for placement in the Quality category. This evaluation is based on the level of your experience, education, and/or training as determined by your responses to the Assessment Questionnaire. Individuals with veterans' preference are listed ahead of applicants who do not have veterans' preference within each category.

Note: If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your score may be adjusted to more accurately reflect your abilities, or you may be found ineligible. Please follow all instructions carefully. Errors or omissions may affect your rating. Providing inaccurate information on Federal documents could be grounds for non-selection or disciplinary action up to including removal from the Federal service.

To view the application form, visit: https://apply.usastaffing.gov/ViewQuestionnaire/10750947

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.